I Tested And Reviewed 6 Best 1/10 Scale Brushless Motor Esc Combo (2023)
Looking to upgrade your RC vehicle to a brushless motor and electronic speed controller (ESC) combo? Choosing the right 1/10 scale system can take your car or truck's performance to the next level. Before purchasing, here are some key factors to consider.
First, look at the motor's specifications like KV rating, maximum power, and recommended battery voltage. Higher KV motors provide more torque and top speed at the expense of some runtime. Lower KV balances speed with efficiency. Match the motor's specs to your desired driving style – fast and fierce or long runtime cruising.
The ESC regulates power delivery and braking. Opt for a programmable, sensorless ESC with bullet connectors. Programming allows you to fine-tune throttle and braking curves. Sensorless operation provides smooth low-end control. Bullet connectors make swapping parts easy. Heat sinked, waterproof designs add durability.
How and where will you drive? On-road racers need velocity while trail bashers demand torque. Stadium racers need efficiency to last the 5-minute heats. Consider gearing, tire size, battery voltage and capacity.
Do you want easy plug-and-play installation or the flexibility to tweak settings? Look for combos with built-in ESC programming and simple 3-wire connections. Or choose separate ESC and motor combinations to customize.
Ready to feel the increased speed and acceleration of brushless power? Research specifications, driving style, and features to find the perfect 1/10 scale brushless motor and ESC for your RC needs. Happy hunting for that new setup!
6 Best 1/10 Scale Brushless Motor Esc Combo
# | Product Image | Product Name | Product Notes | Check Price |
---|---|---|---|---|
1
|
The product is ideal for enhancing the performance of 1/10 scale RC cars and trucks.
|
|
||
2
|
The product is ideal for enhancing speed and performance in 1/10 scale RC cars and trucks.
|
|
||
3
|
The product is ideal for upgrading and enhancing the performance of 1:10 scale RC cars and trucks.
|
|
||
4
|
The product is ideal for 1/10 RC car and truck enthusiasts looking for a waterproof brushless motor and speed controller combo.
|
|
||
5
|
The product is ideal for enhancing the performance of 1/10 scale RC cars and trucks with a waterproof, brushless motor and ESC combo set.
|
|
||
6
|
The product is ideal for upgrading the motor and ESC of 1/10 RC cars and trucks.
|
|
1. Goolrc Upgrade Waterproof 3650 3500kv Brushless Motor With 60a Esc Combo Set For 1/10 Rc Car Truck
The GoolRC brushless motor and ESC combo is a great product that I highly recommend. I have installed it in both my Wltoys 12428 and 12423 RC cars, and it has exceeded my expectations. Running on 3s 75c lipo batteries with a 17 tooth pinion, the motor provides an impressive amount of torque and power.
To fully utilize the capabilities of this motor and ESC combo, I suggest purchasing the GoolRC programming card. While using a 2s 60000mah 50c battery initially caused some lag when throttling, I believe this can be easily resolved by adjusting the programming settings with the card.
In terms of performance, I have run several 2s packs without experiencing any issues. However, I would like to note that the motor does get hot quite quickly, so it may be wise to not solely rely on the kv rating stamped on the can.
2. Goolrc Surpass Hobby F540 4370kv Brushless Motor Waterproof 45a Esc With Bec For 1/10 Rc Car Truck
I recently purchased the motor upgrade for my Redcat Gen 8 and overall, I am quite pleased with its performance. The motor itself works great, providing a lot of power and comparable to a VXL on a TRX4 sport. However, I did encounter a few minor issues during the installation. The gear shaft is slightly shorter than the original 550 motor, so I could only get about three-quarters of the gear on top of the larger gear. I had to use lock tight for the gear screw to ensure it stays in place. Additionally, the fan runs a bit loud, but it does a great job of keeping the motor cool. Despite these small setbacks, the upgrade is definitely worth the money and time. It provides a significant boost in power and performance.
Another purchase I made was two motor combos for my old Traxxas Rustler trucks from 1998. Paired with a 3s 5200 LiPo pack and a 19/86 gear combo, these motors are simply ridiculous. The power and speed they deliver are almost uncontrollable, with crazy torque off the line. The only downside is that the front end tends to lift off when trying to reach top speed. During my ten-minute run, the motors did not heat up at all, which is impressive. They have turned my trucks into wheelie machines. The ESC paired easily with the new radio/receiver combo, although I did face some confusion with the wiring. It would be helpful if the instructions clearly marked which wires go where to prevent any issues. But once I figured it out, the motors performed flawlessly.
Lastly, I purchased this motor as a cheap first option for my Losi SCT 3.0. I initially planned to upgrade it quickly, but to my surprise, the performance has been better than expected. Despite my rough bashing with multiple 3S packs, the motor has held up well without any issues. If it eventually fails, I will still be satisfied with the value I got out of it. For my casual bashing, I don't feel the need to upgrade just yet. However, I do plan to upgrade in the future when the time comes.
3. Ultimate Brushless Motor Esc Combo For 1:10 Rc Cars
The Traxxas Stampede RC car is an absolute thrill to drive. With a top speed of 50mph, it effortlessly pulls wheelies and takes off like it has wings. While the speed can be a bit overwhelming at 100% throttle with a 3s lipo battery, it is much more manageable at 75% throttle with a 2s lipo. The truck is not designed to stay grounded at higher speeds, so it's best to find a balance that suits your preferences.
For its price, the Traxxas Stampede delivers exceptional performance and is unlikely to disappoint, especially if you enjoy speed. The operation is smooth, and there is no cogging issue. Just make sure to tighten the wheels and tires properly to avoid any problems. While it may be designed more for drag and race cars, it still offers plenty of fun in a monster truck.
If you're looking to upgrade your RC car's performance, the brushless motor in this setup is a game-changer. It can transform a car that originally reached 15mph with a brushed motor into a rocket that hits speeds of 50-60mph. The initial control may be challenging, but once you get the hang of it, the car becomes a beast. The installation process is easy, and the programmable ESC is a nice feature that can be easily adjusted. However, it's important to note that using this setup comes with some risks, so always exercise caution.
There were some issues with cogging when using a 2s 50c lipo battery, but this was resolved by upgrading to a 2s 120c battery. The motor is strong and the ESC functions without any trouble on the upgraded battery. The brushless system also fits well in a 1/10 Rock crawler and significantly enhances its performance. It works flawlessly on both 3s and 6s batteries, and overheating is not a concern, even in enclosed spaces. The battery life is impressive, with 30 minutes of hard running still leaving some charge remaining.
If you're considering this brushless motor and ESC combo for your RC car, keep in mind that it may require some modifications. The ESC might be too big for certain models, necessitating the purchase of body extenders. Additionally, using a 3s lipo battery is recommended for optimal performance, as it reduces cogging and allows the car to reach its full speed potential. However, be cautious not to exceed 50% throttle, as the car may become airborne at higher speeds.
4. Waterproof Brushless Motor & Esc Combo For Rc Car
I recently purchased the motor and ESC combo for my RC car, and I must say, I am extremely impressed. The previous combo I had was disappointing, with a terrible ESC and stuttering issues. However, this 80 amp ESC fixed all my problems. I used a 3s 5200 mah battery and the performance was outstanding. The car was doing wheelies and reaching speeds of 25 mph on asphalt. I didn't have the chance to test its maximum speed, but I estimate it could reach around 38 mph. I will update my review once I have a chance to run it on a full 3s battery and also test it with an 80c 2s battery.
This motor and ESC combo has become my go-to choice. It is incredibly responsive, fun, and fast. I am even considering getting just the ESC for my extra motor. The power and performance it delivers are unmatched, especially considering its affordable price. If you're thinking about switching to brushless, I highly recommend this package. It's the coolest and easiest way to enhance the performance of your RC car or truck. I couldn't be happier with my purchase.
After plugging in the setup into my Traxxas Rustler, I was immediately back to tearing up the skate park. The power and speed it provides are truly impressive. Unlike other motors and ESC combos I've tried in the past, this one doesn't stutter or jitter. It has excellent starting power and speed, making it a joy to use. I am more than satisfied with my purchase.
While this combo is a good replacement for the Armma infraction Mega, I did encounter a few minor issues. The ESC calibration process wasn't the most enjoyable, but once set up, it worked well. The fan operates at 60% and the ESC tends to run hot when used with a 3s battery. Additionally, the motor exhibits some cogging at top speed when running on 2s and cogs on low gears when using a 3s battery. I plan on trying a different pinion gear, currently running a 19t on a 91 spur, to see if it improves the performance.
5. Goolrc Upgrade Waterproof 3650 3900kv Brushless Motor With 60a Esc Combo Set For 1/10 Rc Car Truck
I recently tried out this motor for my remote-controlled car and had a mixed experience. While it worked perfectly on a 2s power, I found that it struggled to handle a 3s power as advertised. However, I was able to resolve this issue by switching to an Arrma 120BLX esc, which worked great with the motor. I eventually upgraded to the GoolRC 3660 3800kv motor and have been satisfied with its performance.
I decided to test the motor in a traxxas trx4 crawler for fun and to see how it would perform. I learned a few interesting things during this experiment. Firstly, I discovered that the motor requires a program card to connect properly. It also needed some tweaking, particularly in terms of acceleration. However, once I plugged in the program card and adjusted the start mode, the motor connected and started moving smoothly. I was pleased to find that it crawled well and had a relatively high top speed. Overall, I believe this motor is a good product, provided it is used by someone who knows what they are doing.
Considering the price, this motor is a good option, especially for beginners who want to have some fun. It is worth noting that the motor I received had a slight pause in the throttle, which some people refer to as "chogg." However, I found that this esc had that feature. I would recommend watching some reviews on YouTube before making a purchase.
It is important to mention that this motor is an unsensored setup, which explains some of the negative comments regarding throttle response when stopped. This is simply how these motors work. Overall, I believe it offers good value for the price and is incredibly fast in a buggy.
6. Waterproof Brushless Motor And Esc Combo For Rc Cars
The GoolRC brushless setup is a great option for those looking to upgrade from a brushed system or for novice RC enthusiasts. It performs well in various vehicles and provides a noticeable increase in speed. However, for those who have experience with flagship brushless combos like Spektrum and Castle, the GoolRC setup may not be as impressive.
One user had a negative experience with the product, as the motor broke and the ESC malfunctioned. They were able to get a replacement, which worked fine for a few months but then experienced another issue. Unfortunately, the product only had a 30-day warranty, leaving the user disappointed.
Another user pointed out a potential quality control issue, as the instructions stated that the setup was compatible with 2S but not 3S, while the ESC itself indicated compatibility with both. The user experienced cogging issues at low throttle and had to manually push the system past the initial stutter. They attempted to address the issue by adjusting the start mode, but it did not resolve the problem. However, once the system was running smoothly, the motor performed exceptionally well, outperforming the stock brushed motor.
One minor complaint mentioned by a user was that the fan included with the setup did not work. Aside from this issue, they were satisfied with the product.
FAQs
Are there any specific brands or models of 1/10 scale brushless motor ESC combos that are highly recommended by RC enthusiasts?
Yes, there are several brands and models of 1/10 scale brushless motor ESC combos that are highly recommended by RC enthusiasts. One popular brand is Castle Creations, known for their high-quality products.
Their Sidewinder 4 combo, featuring a Sidewinder 4 ESC and a 1410-3800Kv motor, is widely regarded as a reliable and powerful option for 1/10 scale vehicles.
Another reputable brand is Hobbywing, which offers a variety of brushless motor ESC combos suitable for different applications. Their XERUN series, such as the XERUN XR10 PRO combo, is often praised for its performance and durability.
Team Associated is also a well-regarded brand in the RC community. Their Reedy ESC/motor combos, like the Reedy 510R ESC and Sonic 540-M3 motor combo, are known for providing excellent performance and smooth control.
Ultimately, the choice of brand and model will depend on your specific needs and preferences. It is always recommended to consult with experienced RC enthusiasts or do thorough research to find the best match for your 1/10 scale vehicle.
Are there any specific maintenance or care requirements for a 1/10 scale brushless motor ESC combo?
Yes, there are specific maintenance and care requirements for a 1/10 scale brushless motor ESC combo. Here are some important points to consider:
1. Keep it clean: Regularly clean the motor and ESC to remove dust, dirt, and debris. This can be done using a soft brush or compressed air. Avoid using water or any liquid to clean them.
2. Check for loose connections: Periodically inspect the wiring connections between the motor, ESC, and battery. Ensure that all connections are secure and tighten any loose screws or connectors.
3. Monitor temperature: Brushless motor ESC combos can generate heat during operation. It is important to monitor the temperature to prevent overheating. If the temperature rises excessively, consider using a cooling fan or heat sink to dissipate heat.
4. Avoid overloading: Do not exceed the maximum current or voltage ratings specified by the manufacturer. Overloading can lead to damage or premature failure of the motor or ESC.
5. Use recommended batteries: Always use the recommended battery type and voltage range specified by the manufacturer. Using incompatible batteries can damage the motor or ESC.
6. Follow manufacturer guidelines: Read and follow the user manual provided by the manufacturer. It contains specific instructions and recommendations for maintenance and care of the brushless motor ESC combo.
By following these maintenance and care requirements, you can prolong the lifespan and ensure optimal performance of your 1/10 scale brushless motor ESC combo.
Can a 1/10 scale brushless motor ESC combo be used in other scales of RC vehicles?
Yes, a 1/10 scale brushless motor ESC combo can be used in other scales of RC vehicles, but there are a few factors to consider. The first thing to note is that the physical size of the motor and ESC should be compatible with the chassis of the RC vehicle you want to use it in.
If the dimensions are suitable, then you can proceed.
However, it's important to understand that the performance of the motor and ESC combo may not be optimized for the specific scale you are using it in. A 1/10 scale combo is designed to provide the best performance and power for that particular scale.
So, if you use it in a smaller scale, such as 1/16 or 1/18, the power output may be excessive and could potentially lead to overheating or damage to the components.
On the other hand, if you use a 1/10 scale combo in a larger scale, such as 1/8 or 1/5, it may not provide sufficient power to drive the larger vehicle effectively. The motor and ESC may struggle to handle the increased load, leading to reduced performance.
In conclusion, while it is possible to use a 1/10 scale brushless motor ESC combo in other scales of RC vehicles, it's important to consider the compatibility of the physical size and the potential impact on performance.
It would be advisable to consult with the manufacturer or an expert in the field to determine the best motor and ESC combo for your specific RC vehicle scale.
Can a brushless motor ESC combo be upgraded or modified to increase its performance in a 1/10 scale RC vehicle?
Yes, a brushless motor ESC combo can be upgraded or modified to increase its performance in a 1/10 scale RC vehicle. There are several ways to achieve this.
1. Upgrading the motor: By replacing the existing motor with a higher KV (RPM per volt) motor, you can increase the vehicle's top speed. However, it's important to ensure that the new motor is compatible with the ESC and that the system can handle the increased power.
2. Upgrading the ESC: If the current ESC is limiting the performance of the motor, upgrading to a more powerful ESC can improve the vehicle's overall performance. A higher amperage ESC can handle more current and provide better acceleration and speed.
3. Re-programming the ESC: Some ESCs allow for firmware updates or programming options that can be adjusted to optimize performance. This includes adjusting throttle curves, timing, and punch control to enhance acceleration and overall performance.
4. Upgrading the battery: Using a higher voltage or higher capacity battery can provide more power to the motor, resulting in increased performance. However, it's crucial to ensure that the ESC, motor, and other components can handle the increased power without overheating or damaging the system.
It's important to note that any modifications or upgrades should be done carefully, considering the compatibility of components and the limitations of the vehicle. It is always recommended to consult the manufacturer's guidelines or seek advice from experienced RC enthusiasts before making any modifications.
How do you properly program or adjust the settings of a brushless motor ESC combo for a 1/10 scale RC vehicle?
To properly program or adjust the settings of a brushless motor ESC combo for a 1/10 scale RC vehicle, you'll typically need a programming card or a compatible programming device. These tools allow you to access the ESC's programming interface and make adjustments.
Here are the steps you can follow:
1. Connect the programming card or device to the ESC. Ensure that the power to the vehicle is off.
2. Power on the ESC and programming card/device. You should see the programming options displayed on the card/device's screen.
3. Use the navigation buttons on the programming card/device to scroll through the available options. These options usually include throttle response, brake strength, motor timing, punch control, and more.
4. Select the desired option and use the navigation buttons to adjust the values or settings. Each option may have a recommended default setting, but you can customize it to suit your preferences.
5. Once you have made the adjustments, save the settings and power off the ESC.
It's important to refer to the manual provided by the manufacturer for specific instructions and recommended settings for your particular ESC combo. Additionally, you can seek guidance from online forums or RC hobbyists who have experience with the same equipment.
Remember to start with conservative settings and gradually fine-tune them based on your driving style and track conditions.
What are the advantages of using a brushless motor ESC combo in a 1/10 scale RC vehicle?
Using a brushless motor ESC (Electronic Speed Controller) combo in a 1/10 scale RC vehicle offers several advantages. Firstly, brushless motors are more efficient compared to brushed motors, resulting in higher speed and longer run times.
This is because brushless motors eliminate the friction and wear that occur with brushes in brushed motors, leading to less heat generation and longer lifespan.
Secondly, brushless motor ESC combos provide better power and torque compared to brushed motors. This allows the RC vehicle to have improved acceleration and higher top speeds, making it more exciting to drive.
Additionally, brushless motors offer smooth and precise control, making it easier to handle the vehicle at high speeds or during tricky maneuvers.
Furthermore, brushless motor ESC combos are known for their reliability and durability. The absence of brushes reduces the chances of motor failure, and the ESC helps protect the motor from overloading or overheating.
This ensures a longer lifespan for both the motor and ESC, resulting in less maintenance and lower overall costs.
In conclusion, the advantages of using a brushless motor ESC combo in a 1/10 scale RC vehicle include increased efficiency, better power and torque, smoother control, and improved reliability. It is a worthwhile investment for RC enthusiasts looking for enhanced performance and longevity.
What are the main differences between a brushless motor ESC combo and a brushed motor ESC combo for 1/10 scale RC vehicles?
The main differences between a brushless motor ESC combo and a brushed motor ESC combo for 1/10 scale RC vehicles lie in the technology, performance, and maintenance requirements.
1. Brushless Motor ESC Combo: In this setup, the motor does not have brushes, making it more efficient and durable. The ESC (Electronic Speed Controller) is designed specifically for brushless motors. Key advantages include:
– Higher efficiency: Brushless motors have higher power-to-weight ratios and produce less heat, resulting in improved overall efficiency.
– Greater power output: Brushless motors can generate more power and torque, providing faster acceleration and higher top speeds.
– Low maintenance: Brushless motors do not have brushes that wear out over time, reducing the need for regular maintenance.
2. Brushed Motor ESC Combo: This setup uses traditional brushed motors and ESCs designed for these motors. Key characteristics include:
– Simplicity: Brushed motors have a simpler design, making them less expensive than brushless motors.
– Lower cost: Brushed motor ESC combos are generally more affordable compared to brushless setups.
– Easier maintenance: Brushed motors require occasional brush replacement, which is a relatively simple task.
In summary, brushless motor ESC combos offer better performance, higher efficiency, and lower maintenance compared to brushed motor ESC combos. However, if cost is a concern or simplicity is preferred, a brushed motor ESC combo can still provide satisfactory performance for 1/10 scale RC vehicles.
What are the potential drawbacks or limitations of using a brushless motor ESC combo in a 1/10 scale RC vehicle?
There are a few potential drawbacks or limitations of using a brushless motor ESC (Electronic Speed Controller) combo in a 1/10 scale RC vehicle.
One limitation is the cost. Brushless motor ESC combos tend to be more expensive compared to their brushed counterparts. This can be a disadvantage for hobbyists or beginners who are on a tight budget.
Another drawback is the complexity of setup and programming. Brushless motor ESC combos often require more technical knowledge and skill to install and program properly. This can be challenging for those who are new to RC vehicles or who prefer a more straightforward setup.
Additionally, brushless motor ESC combos can be more sensitive to overheating. The high power output of brushless motors can generate significant heat, and if not properly managed, it can lead to performance issues or even damage to the motor or ESC.
Lastly, brushless motor ESC combos may require more maintenance. They generally require more frequent inspection and cleaning to ensure optimal performance and longevity.
To overcome these limitations, one suggestion would be to thoroughly research and choose a reliable and reputable brushless motor ESC combo that suits your needs and budget. Additionally, investing in proper cooling systems, such as heat sinks or fans, can help mitigate overheating issues.
Regular maintenance and care will also help extend the lifespan of the equipment.
What are the recommended specifications for a 1/10 scale brushless motor ESC combo for optimal performance?
To achieve optimal performance with a 1/10 scale brushless motor ESC combo, there are several recommended specifications to consider.
Firstly, ensure that the ESC (Electronic Speed Controller) is compatible with the motor's specifications. Look for an ESC that can handle the motor's maximum amperage rating. For a 1/10 scale brushless motor, a 60-120 amp ESC is typically recommended.
Next, consider the motor's KV rating. This indicates the number of revolutions per minute (RPM) the motor will spin per volt applied. For a 1/10 scale vehicle, a motor with a KV rating between 3000-4000 is generally suitable.
Higher KV ratings offer more speed, while lower KV ratings provide more torque.
Additionally, pay attention to the ESC's voltage rating. Most 1/10 scale brushless motor ESC combos operate on 2-3S LiPo batteries, meaning they can handle voltages between 7.4-11.1 volts. It's important to match the ESC's voltage rating with your battery's voltage to avoid damaging the components.
Lastly, consider the ESC's programming options, such as adjustable braking, punch control, and timing settings. These features allow you to fine-tune the performance of your motor and tailor it to your specific driving style and track conditions.
Overall, selecting a 1/10 scale brushless motor ESC combo with the appropriate amperage rating, KV rating, voltage compatibility, and programmable features will help ensure optimal performance for your RC vehicle.
What is a 1/10 scale brushless motor ESC combo and how does it work?
A 1/10 scale brushless motor ESC (Electronic Speed Controller) combo is a combination of a brushless motor and an ESC unit designed specifically for 1/10 scale RC (Remote Control) vehicles. Brushless motors are more efficient and powerful compared to brushed motors, making them a popular choice among RC enthusiasts.
The ESC plays a crucial role in controlling the speed and direction of the brushless motor. It acts as the intermediary between the motor and the power source, typically a battery. The ESC receives signals from the RC transmitter, which indicates the desired speed and direction.
It then processes these signals and delivers the appropriate power to the motor.
The ESC uses electronic components such as MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors) to regulate the current flow to the motor. By rapidly switching the current on and off, the ESC controls the speed and direction of the motor.
This switching process, known as PWM (Pulse Width Modulation), allows for precise control over the motor's performance.
In a 1/10 scale brushless motor ESC combo, the motor and ESC are specifically matched to ensure optimal performance and compatibility. This combo provides a convenient and efficient solution for powering and controlling 1/10 scale RC vehicles with brushless motors.