I Tested And Reviewed 9 Best Bathroom Exhaust Fans With Light And Heater (2023)

I am very impressed with this Delta bathroom fan with heater. The installation process was incredibly easy, almost a direct replacement for my old Delta unit that had served me well for over 20 years. I wanted something new and with an added heater, and this unit delivered on both fronts.

One of the standout features of this fan is how quiet it is, even when both the exhaust fan and heater are running. The heater blows out pleasantly warm air, and the blower is impressively strong. It's worth noting that the heater blows out in the opposite direction of the exhaust fan, so it's important to plan out where you want the heat to go. You can aim it towards the shower or any other direction you prefer.

I was able to replace the light socket with a standard one from my old unit so that I could install an LED light. The unit comes with a 26-watt curly bulb, but I opted for a 13-watt Daylight LED for its energy efficiency and brighter, cleaner light. It's important to note that Delta uses a special bulb socket to prevent the use of old 100-watt incandescent bulbs, which can cause damage to the plastic light cover.

Thanks to a previous review, I decided to replace my old "twin engine" Nutone unit in my hall bath with this Delta fan, and I couldn't be happier with the results. The difference is remarkable, and I can't believe I waited so long to make the switch. The retrofit process was simple, although it did require some adjustments in the hot attic.

For those considering installing this fan on their own, I would recommend comparing the vent sizing and existing wiring to ensure compatibility. Replacing an older unit with this Delta fan will make a significant difference in noise level, as the old one was a tooth-rattling 4 sones compared to this unit's 1 sone. Additionally, it performs exceptionally well in removing moisture and humidity from the bathroom.

In terms of price, this Delta fan with heater is competitively priced, falling within the budget range while still delivering excellent performance. Overall, I am thoroughly satisfied with my purchase and would highly recommend this Delta bathroom fan with heater to anyone in need of an upgrade.

The Broan 9093WH heater/fan/light unit is a fantastic addition to any bathroom. Its versatile features make it a must-have for families. One standout feature is the nightlight, which emits just the right amount of light for nighttime visits. It provides enough illumination to see without being too bright and disruptive. The best part is that the nightlight is always on, eliminating the need to constantly turn it on or off.

The fan function is powerful yet surprisingly quiet. It effectively clears the room of fog after a shower, and the timer function ensures that it runs for just the right amount of time. The noise level is significantly lower compared to other bathroom fans, making it a peaceful and enjoyable experience.

The heater function is exceptional. It allows you to choose your desired temperature, and the unit will cycle on and off to maintain that temperature. This is especially useful on cold mornings when you don't want to freeze in the shower. It ensures a comfortable and cozy environment throughout your bathroom.

In terms of durability, the Broan 9093WH has proven itself. This reviewer mentions that they have been using their first unit for over 10 years and loved it so much that they purchased a second one for their second bathroom. It's a testament to the unit's quality and longevity.

One important maintenance tip mentioned by the reviewer is to regularly vacuum the unit's interior components. This helps prevent dust buildup and ensures optimal performance. The process is quick and easy, taking only 30 seconds. By following this simple maintenance routine, the unit will continue to provide years of reliable service.

The reviewer also highlights how easy it was to install the Broan 9093WH. They were able to fit the new assembly into the existing can in their ceiling without any issues. The wiring harness connector seamlessly connected to the old connector, making the replacement process hassle-free.

Lastly, the reviewer addresses concerns about noise level. They clarify that the new exhaust fan is significantly quieter compared to their old unit. While it can be heard, it is not overwhelming or disruptive. They debunk claims from other reviews stating that the fan is loud, emphasizing that it is actually much quieter compared to their previous fan.

I have had the opportunity to experience various hotels, friends' renovations, and new homes, but none of them compare to the functionality of this particular unit. It has truly been a game-changer for our master bath makeover. In our old home, we still had wall heaters, which were usually sufficient for the Southern California weather, but we needed instant heat for those chilly mornings. This unit provided the perfect solution.

The unit comes with a single light, which does a decent job on its own. We decided to wire it up to the same switch as our over-the-mirror lights, and now our bathroom is beautifully bright. Turning on two or four of the heat lamps creates a vacation-like atmosphere, and the light feels wonderful. As a bald man, I must note that standing directly under the lights can quickly become uncomfortable due to the heat. With our 8ft high roofline, the heat function works perfectly.

Now, let's talk about the fan. At first glance, it may not seem like much, but it does an excellent job. Without switching it on, everything in the room gets steamed up during showers, as expected. However, once we turn on the fan, the steam disappears almost instantly. Even running the fan afterwards quickly dries out the room. I believe it is the combination of the fan and heat that makes it so effective.

In terms of noise, the fan is just about right. Of course, complete silence would be ideal, but then there's a risk of forgetting to turn it off. The noise is noticeable, but personally, it does not bother me. My wife and I can easily have a conversation in the bathroom without the fan noise being a problem. I hope this information helps in your decision-making process.

The operation of this fan heater/fan/light combo is truly wonderful. While the installation may have taken around 2 hours for an experienced contractor, it was well worth the time and effort. The fan is remarkably quiet and efficiently circulates air in our approximately 100 square feet bathroom. The heat bulbs can be turned on individually (two at a time) or all four simultaneously, depending on the need. Although we haven't used the heat function extensively due to installing it during the warm summer months, quick trials have shown that it warms up relatively quickly.

I absolutely love this bathroom fan and heater! I decided to purchase one for each bathroom in my house, and I couldn't be happier with my decision. The fan operates so quietly that you can barely hear it, yet it works incredibly well. One of my bathrooms doesn't have a window, and this fan has been a game-changer in preventing condensation buildup. The heater function is also amazing, and I even added a timer to ensure that my child doesn't accidentally leave it on. Overall, this was a fantastic purchase!

The installation process was relatively straightforward. The fan comes with a folding bracket that expands into the ceiling after cutting the hole. However, the instructions were a bit lacking in explaining that you need to remove the exhaust duct, install it on the bracket first, and then slide the larger unit into the ceiling bracket with the exhaust duct attached. It took me around 20-30 minutes to install once the hole was cut, but it was a little tricky.

In terms of power usage, the unit can be switched between 50, 80, or full 110 CFM heat flow. I measured that on full heat, it uses 1,550 Watts of power. Although I haven't tested the lower settings, I assume there won't be a significant decrease in power consumption. The stated power rating of 1,600 Watts is extremely accurate. It's important to note that you will need a dedicated 20 Amp breaker for this unit, as it uses 13.3 Amps. It's also ideal to use 12AWG wire for proper electrical safety.

When it comes to noise, this fan and heater combo is impressively quiet. In fact, it's so quiet that you have to stand directly under it to confirm if it's even on. Personally, I appreciate this feature as it ensures a peaceful and undisturbed bathroom experience.

Additionally, I set up this fan and heater on a Wyze smart switch, allowing me to control it remotely. I can easily monitor if it's on, set up automation, and even activate an auto-shutoff feature to prevent accidental extended usage.

I recently had this fan and heater installed in my remodeled master bathroom by a professional electrician. The heater option was a must for me, and so far, it has been working perfectly. It's important to note that there is a slight delay when turning on the switch before the fan and heater start operating, so don't expect instant warmth. However, one feature that I really appreciate is the internal timer, which automatically turns off the unit after 2 hours.

I did experience an issue with the heating element after a few weeks of use. The output started to diminish until it became difficult to tell if the heating element was even working. I contacted the electrician who installed it, and after testing the unit, he determined that the heating element was defective. We reached out to Panasonic, and they promptly shipped us a replacement heating element and filter. I must note that they only replaced the parts rather than the entire unit, which saved us on additional installation costs. However, it would be helpful if the instructions for filter maintenance were more intuitive in the manual. The filter is located behind the grill and can be easily cleaned, but it's important to understand its exact location. If you have trouble finding it, I recommend contacting Panasonic for assistance. Now that the new parts are installed, the unit is working perfectly fine. Although it may not be as whisper-quiet as advertised, it still operates at an acceptable noise level.

I recently purchased two fans to replace the existing ones in my home, as part of a remodeling project. Although there was a slight issue with the setup for new fan installation, I was able to figure out a solution easily. I inserted the fan into the attic space, connected the power, and used blocks cut from a 2×4 to secure it. I had to drill a few holes in the frame, but it was a simple task. After pulling the fan to sit on the sheetrock, I screwed it into the blocks and added a bead of chalk to the sheetrock edge. Finally, I installed the fan motor assembly, light, and cover.

I decided to install one of the fans in my shower, and it worked flawlessly. The installation process was a breeze, and the fan operated quietly. The only issue I encountered was that the light emitted a yellow glow.

Prior to purchasing this fan, I spent some time searching for a bathroom vent fan to replace my previous one. After reading reviews and considering different options, I settled on the Kaze fan available on Amazon. When the package arrived, I eagerly opened it and found everything in good condition. The installation took some time due to a few hiccups along the way, but I eventually completed it with the help of some additional supplies from the store. I also touched up the paint to make it look as good as new. I am extremely satisfied with the Kaze fan, especially its light and heating element, which help prevent fogging during showers – a feature my old fan lacked.

I am delighted with the quality of this product. I purchased it to retrofit my bathroom in my 1900 Victorian home, as the existing exhaust fan was noisy and ineffective in clearing steam. This was leading to mold issues in the bathroom. Following my father's advice (who is a contractor), I looked for a fan specifically designed for retrofit installation and that used a blower instead of a standard fan assembly. While the installation process took around four hours due to the challenges of working in an older home, I am overall extremely pleased with the results.

Although the fan is not completely noiseless, it is significantly quieter than the NuTone fan I replaced. It also effectively clears all steam from the bathroom while showering, leaving the mirror completely fog-free.

I recently purchased this product for my large bathroom, which is approximately 250 square feet. I must say, it has exceeded my expectations. Initially, I decided to make a modification by cutting out the fins in front of the blower for increased air speeds, and this significantly improved the heating performance. However, if you have a smaller bathroom, this modification may not be necessary. Regardless, the product does a great job of heating our bathroom.

Although we don't use the exhaust function frequently, it has worked well whenever we have needed it. The noise level in our large bathroom is acceptable, considering that most fans tend to be quite noisy. The ones that claim to be quiet often lack in performance, so finding a balance is essential. I would definitely purchase this product again and even recommend it to others. In my opinion, it is likely the best option on the market and a great value for the money.

One thing to note is that I accidentally purchased the wrong model when I wanted to replace the elements but keep the existing housing and electrical box. The two models look identical from below, but they have different connections. To avoid this mistake, I recommend checking the model number tag by removing the cover and verifying the correct model before ordering. The model I mistakenly bought combined the two separate electrical connections into one connector, which didn't match my existing setup.

The process of replacing the elements while keeping the housing was relatively straightforward. I removed the four screws that secured the light/heater and dropped that part out. Then, I removed the four screws holding the exhaust fan and dropped it out as well. Reinstalling the new components from the new system was a breeze. I found it helpful to put two of the screws halfway in and use the slots in the part to rest the light on while inserting the remaining two screws.

I recently purchased and installed this bathroom fan and light unit, and overall, I am quite impressed with its quality and performance. I had to replace my old fan and light that had stopped working after years of use, and this unit proved to be a suitable replacement.

The construction of the fan is solid, and although it was slightly larger than my previous unit, I was able to adjust the drywall hole to accommodate it. If you are using it for new construction, this won't be an issue at all. One feature that it has is a nightlight, which personally, I find to be unnecessary and a waste of electricity. Therefore, I chose not to wire it up and only connected the fan and lights. However, for those who prefer a nightlight, it's there as an option.

The wiring process is fairly straightforward, especially if you have some experience with basic wiring. It has a box connector hole on the back to attach your wires. If you are a novice DIYer, I would recommend hiring a professional to install it, as you will need wire nuts, strippers, and other tools to complete the wiring properly. It's important to do it correctly to avoid any potential fire hazards. It's worth noting that the fan does not have a plug that can be directly plugged into an outlet.

One thing to keep in mind is that this unit requires specific bulbs. They resemble standard twisty CFL bulbs but have a unique base with two tabs that lock into place when twisted. These bulbs may not be readily available locally and may need to be ordered. However, this is a minor inconvenience. With the three included bulbs, the unit provides ample brightness for the bathroom.

The fan itself operates quietly, almost to the point where it's barely audible. I initially had doubts about its strength when I tested it by connecting the fan leads to power, but once installed, it surprised me with its powerful airflow. Even in my large bathroom with high ceilings, I could feel the fan pulling in cool air from under the door. It's quite impressive how much power it has while producing minimal noise.

In terms of aesthetics, this unit perfectly matched the modern twist on my Victorian bathroom remodel. It looks beautiful and blends seamlessly with the overall design. Installation was relatively simple, although I did struggle with the wiring schematic a couple of times before getting it right. Additionally, if you are retrofitting it, you will need to make the electrical connections outside of the box. I ended up running the supply line into an Entrance L attached to the unit, which required some planning and a larger cut in the ceiling. However, once installed, the unit worked flawlessly.

I must highlight the exceptional customer service provided by the company. When I realized that the small cover plate for the light lens was missing, I contacted them, and they promptly found a replacement and shipped it to me, despite the challenging delivery time. This level of support and responsiveness is commendable and further solidifies my recommendation not only for this product but also for the company itself.

I purchased this product with the intention of replacing the fan-motor assembly in my existing unit, and I am pleased with the results. My previous fan, a Broan model 9417DN-R02, lasted for a solid 10 years before the fan stopped working. Initially, I hesitated to replace the entire unit due to the difficult access to the installation area. However, I discovered that the fan-motor assembly is easily replaceable by the user.

The assembly is mounted in a metal housing with just two screws on a metal bracket. It is connected to the unit's circuitry through a small, regular 2-prong plug. Simply remove the two screws and disconnect the plug, and the assembly is out. The process is straightforward, with the only challenge being loosening the screw located inside the housing. This requires caution not to strip the screw due to limited space.

I found that the model 162 (labeled as 162-M on the sticker inside) is essentially the same as my previous model, 9417DN-R02. Surprisingly, the cost of the fan-motor assembly itself is higher than the cost of purchasing the entire unit. In light of this, I opted to buy the whole unit and extract the desired part from it.

While this type of light may not be considered "in style" these days, I personally find it highly functional. It effectively provides warmth as you towel off after a shower during the winter season. By simply turning on the light, the bulb emits a comforting, warm glow that prevents the discomfort of freezing cold while in a towel.

There are two types of bulbs available for this unit. The first is a clear bulb, which produces a moderate amount of heat and is the preferred choice for most individuals as it appears "normal" when turned off. The second option is a red-colored bulb that emits a more intense heat. When selecting a bulb, consider your preferences and needs.

Installation is relatively easy if you have access to the attic or above-ceiling area. You can wire the fan and light together or separately, depending on your available wiring. Simply cut or reuse a hole and drop the unit in from above, attaching it to the framing that supports the drywall. Remember to connect the vent to the outside for proper ventilation.

I recently purchased this fan as a replacement for my old Broan light/heater/fan combo that was on its last legs after 23 years of use. Initially, I thought I could simply switch out the fans and update the grill, but I quickly realized that the new fan wouldn't fit in the old enclosure due to its larger size. This meant that I had to replace the entire enclosure, which was quite a task, especially considering I had to navigate through my trusses in the hot attic. However, one positive aspect was that the new enclosure already had the mount points for the heater, so it was a relatively straightforward installation once I moved the electrical plugin. Additionally, I was able to use the old duct adapter without any issues.

I have to say that this fan is a decent purchase. I bought it to replace my 20+ year old fan of the same model, and buying a new motor, fan, grill, and lens individually would have cost me more than purchasing a whole new unit. When I contacted Broan to inquire if all the parts would fit into my old housing for an easier project, they advised against it and provided me with part numbers to order for a rebuild. However, I decided to try it anyway, and as I suspected, everything fit perfectly into my old housing. It was essentially like installing a brand new fan in just 15 minutes, without any help from Broan customer service.

One thing to note is that the description states that the fan includes acoustic insulation, but this is no longer the case. The new fan does not come with any insulation. In my experience, I don't believe the insulation significantly reduces fan noise as it mainly consists of "air" noise. The fan does make a bit of noise, but in my opinion, this is actually a positive aspect as it indicates that it is effectively moving a lot of air and keeping the bathroom dry. Additionally, the drone of the fan helps to mask any bathroom noises that would otherwise echo down the hall, which I personally appreciate.