I Tested And Reviewed 8 Best Chair Glides For Vinyl Floors (2023)

These chair sliders are a perfect solution for protecting vinyl plank flooring. They are easy to install – simply drill a pilot hole and screw them in. Just make sure to wrap some tape around your drill bit to ensure you don't go too deep. The only drawback is that the stamped metal had small burrs that needed to be removed before installation to avoid any potential foot injuries.

I purchased these sliders to replace the stick-on felt pads on my dining table chairs, and I wish I had done it sooner. The felt material on these sliders is thicker and more durable compared to the stick-on pads that always go flat. So far, they have held up really well and haven't flattened. My only concern is the possibility of the felt coming off and the metal scratching the floor, but thankfully, that hasn't happened yet.

Installation requires drilling pilot holes in your chair legs if you don't already have them. My chairs had plastic screw-on types, but they had become loose and left marks on the floor. The stick-on pads I tried before were no good as they kept coming off and losing their shape. These sliders are a much better alternative and seem to be made very well. I'm glad I made this purchase, and I hope they last for a long time.

I used these sliders on my coffee table, specifically on 9/16" square ends, and they fit perfectly. If you have larger furniture ends, they won't even show. It's a much more affordable option compared to buying the original brass ends for $30 each. I had pre-existing holes on my coffee table ends, but I recommend pre-drilling a hole if you don't have any to prevent splitting the wood.

I've been using these chair sliders for about a month now, and they are holding up really well. Installation was a breeze – drill a pilot hole and screw them in. They effectively protect the floors and prevent the chairs from sliding off. Overall, I'm extremely satisfied with my purchase and highly recommend these chair sliders.

The Teflon furniture slides have proven to be a great addition to my home. The lower coefficient of friction compared to other solid white Teflon grades ensures a smoother glide, making it easier to move furniture effortlessly. The larger surface area of the 1.5" square slides distributes the force evenly, reducing the pressure on the floor and making it even easier to move heavy furniture.

I appreciate the quality of these furniture slides. The packaging includes safety covers over the nail ends, preventing any accidental punctures. Installing them is a breeze – simply position the slide, give it a quick tap with a hammer, and your chair is ready to glide smoothly across any type of flooring, be it tile, wood, or carpet.

What sets these slides apart is the use of firm yet rubbery Teflon on the bottom. This ensures durability and longevity, so you can expect them to last for a long time. I accidentally mishit the nail during installation, but the high-quality nail remained intact. The product even comes with a reusable container, which I repurposed for holding other small items.

One of the reasons I chose these slides is because they are a superior alternative to sticky adhesive pads. Adhesive pads tend to lose their effectiveness after just a few months and can end up sticking to your socks. In contrast, these Teflon slides provide a long-lasting solution without any inconvenience.

I was particularly impressed with how well these slides worked with my heavy chairs. Initially, the chairs were difficult to slide, but after installing the slides, they moved with ease. This has made a significant difference, especially as I get older and value the independence of being able to move furniture without much effort.

For outdoor furniture, these slides are a lifesaver. I have a polywood patio set that sits on a trex composite deck, and the chairs used to scratch the deck whenever we moved them. However, after installing these slides, the scratching issue was completely resolved. The chairs now slide smoothly, and there is no longer any damage to the deck. I took the extra precaution of drilling 1/16" holes in each chair leg before tapping the slides in with a hammer, ensuring a secure fit.

If you have hard wood floors and struggle with your couch or dining chairs slipping and sliding, then these grippers are a must-have. They are highly effective in keeping furniture in place, providing stability and preventing any unwanted movement.

One of the great features of these grippers is their versatility. Users have mentioned that they work well on various types of furniture, including dining room chairs with round or square legs, as well as bar stools with square bottoms. They fit securely and are easy to put on, ensuring that they stay in place even with regular use.

The clear protectors with gray bottoms are highly recommended, as they are of high quality and barely noticeable once installed. They blend seamlessly with the furniture and floor, maintaining the aesthetic appeal of your space.

Furthermore, these grippers outperform the stick-on felt floor protectors that tend to come loose. Users have praised the fact that their chairs now slide smoothly and effortlessly, without any fear of scratching or damaging the floors.

If you have unique furniture with various leg types, such as old oak school or church chairs, these grippers are still an ideal choice. They are designed to fit a wide range of sizes and shapes, accommodating square, oblong, and round legs with ease. They provide a tight and secure fit, even when dragged across rugs or carpets.

In addition to their functionality, these grippers are also durable. Users have found them to be long-lasting, unlike other alternatives such as knitted chair socks that tend to deteriorate and come off easily.

I purchased these sliders to use on the legs of my bed, and I must say, they are exactly what I was looking for. The snug fit ensures that the sliders stay in place and provide optimal functionality. The only minor issue I encountered was that it was a bit challenging to initially fit them onto the legs due to the tight fit. However, I discovered a useful trick that involved rolling the rubber side of the slider over the bottom of the plastic slider, allowing me to easily slide the leg into place. This tip might come in handy for others who are struggling with installation.

I recently acquired a sofa with neglected feet that were difficult to slide across the carpet. The feet were made of bare metal, which was not ideal for any type of flooring. These slider caps have been a game-changer in resolving this issue. They are incredibly easy to install and effortlessly glide across the floor.

This product is straightforward, and there isn't much to elaborate on. However, it's worth mentioning that it functions exactly as advertised. The installation process is a breeze, taking only a few seconds to complete.

We decided to use these chair leg covers/sliders on our small dining chairs. We were facing difficulties in moving the heavy chairs on a thick wool rug. The leg sliders fit perfectly over the stiletto-style legs and made it significantly easier to slide the chairs in and out from the dining table. The clear design seamlessly blends with the legs, making them practically invisible. Considering the price and the speedy delivery, this product is an excellent investment.

If you're looking for a solution to the inconvenience of chairs and tables sinking into carpeting, then look no further. These leg caps are the perfect answer, thanks to Teflon and siliconized plastics. Installing them is a breeze, even on larger leg sizes within their specified fitment range. However, it does require a bit of hand strength. I opted for the clear, square caps and used them on three chairs and one table. I will definitely be ordering more for my other chairs and tables, as well as round ones for additional chair legs. An added benefit is that these caps make vacuuming easier, as they protect the legs from the vacuum and allow for smoother movement of furniture.

I recently purchased these floor protectors and I have to say, they are the best ones I have come across so far. The fit is snug and the pad portion is securely melded onto the silicone tube, ensuring that they stay in place. I no longer have to worry about my chairs scratching my floors because these protectors allow the chair to move freely without being slippery.

Not only are they great for chairs, but I also used them on tables, chairs, and footrests on my newly painted porch. They slide easily without leaving any scuffs or scratches, providing perfect protection for my surfaces.

I have tried other floor protection devices in the past, such as felt stick-on pads and rubber slip-on caps, but they were not as effective as these. The stick-on pads needed to be replaced almost weekly and the slip-on caps left black marks on my wood floors, requiring a lot of scrubbing and attention. However, the floor protectors I purchased replaced these devices and provided a permanent solution. They do not leave any markings on the floor and do not require constant replacement, making them a great value for the price.

One of the things that frustrated me about previous floor protectors was that they would often fall off or move around. However, these leg caps are wonderful in that aspect. They are easy to put on and once they are on, they stay in place without slipping or moving. Additionally, they are easy to clean, as pet fur simply comes right off.

Considering the possibility of the product being discontinued in the future, I plan to buy an extra box as a backup. It's always better to be prepared and have a spare set of these reliable floor protectors on hand.

I recently purchased these chair guards and overall, I am quite satisfied with the product. However, there are a few things that potential buyers should be aware of.

Firstly, during the installation process, it is important to prepare the hole ahead of time to avoid bending the chair guard's attached nail. I learned this the hard way, as I ended up destroying four of the chair guards before realizing that the hole needed to be deep enough to prevent the nail from bending. So, be sure to take this step into consideration before using the product.

In terms of performance, I found that the chair guards worked wonderfully on both 1 1/2 inch protectors on barstools and 1 inch legs on oak chairs. For the latter, I even purchased three-quarter inch tampons to make them less visible, and they worked just as well. These chair guards are great for protecting floors and once properly installed, they do their job perfectly.

However, one drawback I experienced was that the nail attached to the protector tends to bend easily when hammering it into the chair. This resulted in me breaking six pieces while trying to install them on four chairs. I had to order more to replace the damaged ones. To potentially mitigate this issue, I am considering trying the method of drilling a little hole first before hammering the protector in to see if that helps.

Despite this slight inconvenience, the chair guards are effective in preventing wooden chair legs from scratching tile floors. My wife had previously tried stick-on pads, which ended up creating a mess. These chair guards, on the other hand, fit perfectly and seem almost tailor-made for this purpose. As an added bonus, they even helped level out one of the legs on our chairs that used to wobble.

Lastly, I replaced the felt pads that came with my dining room chairs with these chair guards. The difference is remarkable – the chairs now slide easily and no longer make that horrible noise when moved.

I recently purchased this product to protect my new hardwood floors, and I must say, it was the perfect solution. One of the things I really liked about it is that it can fit multiple types of chair legs, making it versatile for different furniture pieces.

When I used these protectors for my kitchen chairs, I found them incredibly easy to put on. The material used is quiet on wood floors, which is a great bonus. After using them for some time, I can confidently say that I would buy them again if needed.

In fact, this is already my third time purchasing these chair leg protectors. They not only go on easily but also stay in place and offer excellent protection for our floors. Our kitchen table gets a lot of use throughout the day, and these protectors have proven to be more durable and long-lasting than any others we have tried before.

One of the main reasons I chose these protectors was because I needed something that wouldn't slip or slide on the floor. Thankfully, these chair leg protectors have met my expectations. I have been using them for a while now, and I have only experienced one split from the wear and tear of moving back and forth. Additionally, they are flexible enough to fit any shape or size, whether it's a rectangle, square, or circle.

This is actually the second batch of chair leg protectors that I have purchased, and I absolutely love them. They make the chairs slide so smoothly, adding convenience to everyday use. Overall, I highly recommend these chair leg protectors for anyone looking to protect their floors and enhance the functionality of their furniture.

I recently purchased these chair sliders and I must say, I am extremely pleased with the results. One of the main benefits I noticed was the reduction in noise caused by my dining chairs sliding on the tile floor. The sliders have effectively minimized any scraping or loud noises, making my dining experience much more peaceful.

What impressed me the most about these sliders is their low profile design. They seamlessly blend with the chair legs, and you can barely tell any difference in height or appearance. Installing them was a breeze, thanks to their easy-to-use nail-on feature. Just a quick hammering into the bottom of the chair legs and they were securely in place.

I do want to mention that the packaging of these sliders is quite small, so be careful not to accidentally throw them away. I almost made that mistake when they arrived in a larger shipping box alongside other items.

Initially, I was hesitant to try these sliders as they were considerably cheaper than the name brand models. However, I am glad I took the chance. Previously, I had used adhesive sliders on my kitchen chairs, but they always fell off, leaving sticky residue and a mess on my wood floors. With these nail-on sliders, I found that they stayed in place much better and didn't cause any damage to my furniture when installed properly.

While these sliders are slightly smaller in diameter and depth compared to the more expensive magic slider versions, they are just as effective in allowing easy sliding and maneuvering of chairs. I am quite satisfied with the results and don't see the need for a 20-pack, but at the same price point as the name brand, why not?

Another benefit of these sliders is their versatility. They work well on both carpet and tile floors, making furniture movement a breeze. I can only imagine they would work just as effectively on hardwood floors too. They are particularly useful for heavy furniture that tends to snag and pull the carpet when moved. These sliders solve that problem and provide a hassle-free experience.

As a dog owner and parent, I am constantly battling with fur and messes in my household. These sliders have been a game-changer in that regard. Unlike felt pads that attract dog hair, these sliders are hair-resistant, making maintenance much easier. I found that using a rubber mallet or a hammer with a piece of cardboard to tap them in worked best for installation.

Lastly, I have a rug under my dining room table and these sliders have made a significant difference. Previously, using felt pads made it difficult to move the chairs around. However, with these sliders, the chairs glide effortlessly over the rug, eliminating any embarrassment when guests need to move them. It feels luxurious and I couldn't be happier with the outcome.