I Tested And Reviewed 10 Best Dimmer Switch For Led Recessed Lights (2023)

I recently purchased the 75w equivalent LED dimmable retrofit hi-hats for my new house, and I must say, they are exactly what I was looking for. With over 50 incandescent hi-hat lights in my home, I needed a solution that would provide the perfect amount of light without overwhelming the space. These LED dimmable lights did just that.

I initially bought a two-pack of these dimmers to test them out, as I had read some reviews mentioning flickering issues. However, I was pleasantly surprised to find that they worked flawlessly. The dimmers were not only more affordable than any local options, but they also outperformed any dimmer I had previously used.

One feature that sets these dimmers apart is the minimum light control wheel. This wheel allows you to set the power for the minimum light when the dimmer is at its lowest setting but not turned off. It may require a bit of adjustment to find the perfect setting, but it is a simple process. By using this wheel, you can ensure that the light will always illuminate at the minimum setting, even when the dimmer is turned all the way down.

Some reviewers may have experienced issues with the minimum light setting because they did not properly set this control wheel during installation. It is important to find the right balance, where the light consistently illuminates at the minimum setting. I have found that by playing around with the wheel and testing the switch a few times, I can achieve the desired outcome.

Another great feature of these dimmers is the screw-less faceplate that comes included. It adds a sleek and modern look to my home, and I appreciate the attention to detail in the design.

My only issue with these dimmers is that they are not compatible with gang boxes, which limits their use in certain areas of my home. However, I am mainly using them with 6" Fein Retrofit 75W LED hi-hats from Costco, and they work perfectly together.

The installation of this switch was fairly simple, although there was some confusion with the red wire. I was able to connect it with the white wires and the other wires were connected as expected. The switch works well and it's convenient to have Alexa control my lights. The quality and appearance of the switch are also impressive.

I recently installed these switches to replace two non-dimming 3-way switches. The installation process was easy for someone with experience in this type of work. I found it helpful to remove the wings on each side of the switches before installation, especially if the junction box is crowded. The slide mechanism works smoothly and the on/off switch at the bottom provides clear indication. Overall, it's a good product that is user-friendly.

We have two of these smart wifi dimmers, one in a single pole setup and one in a 3-way setup. Both switches work well and the installation was straightforward for the single pole setup. However, the 3-way setup instructions were confusing and difficult to read due to the small print. After contacting the seller, they provided clearer instructions with only one installation option, which worked perfectly. Once installed, the dimmer in 3-way mode functions flawlessly. Both switches control LED track lights and the dimming range is excellent.

I purchased this switch to upgrade the lighting in my kitchen to LED. It cost significantly less than what I spent at Home Depot for similar supplies. The installation was simple and the switch works great. I am very satisfied with my purchase and couldn't be happier.

Are you tired of the mundane on/off experience that most switches offer? Look no further than the GE Single Pole Rotating Dimmer Switch. This switch is not your ordinary lighting control device. It is a master of the in-between, a gateway to the twilight zone of illumination.

Unlike traditional switches, the GE Single Pole Rotating Dimmer Switch allows you to explore the realms of brightness. With its rotating magic, you have the power to find that perfect balance between a floodlight and a candle flicker. Imagine being in a room where you don't want blinding brightness or complete darkness. This switch grants you the ability to bask in a gentle glow that perfectly suits your mood.

What sets this dimmer switch apart from the rest is its ability to create an atmosphere that is neither too bright nor too dim. It's like finding the Goldilocks of lighting levels. With the GE Single Pole Rotating Dimmer Switch, you can revel in the delightful shades of twilight and embrace the intrigue that comes with it.

But there's more to this switch than just its ability to dim the lights. It is also compatible with Sunco LED bulbs, which have been proven to work flawlessly with this switch. Say goodbye to flickering and strobing issues that are often blamed on the switch itself. In reality, it's the bulb that plays a significant role in the overall performance.

So, why settle for a basic on/off switch when you can embark on a mysterious journey with the GE Single Pole Rotating Dimmer Switch? Let it be your guide to creating the perfect ambience, where you are neither fully illuminated nor completely in the dark. This switch transcends the mundane and offers an illuminating experience like no other.

This dimmer switch is a great option for those looking to upgrade their older fixtures to LED bulbs. It effectively eliminates flickering lights, providing a smooth and consistent dimming experience. The option to use one pole for installation is convenient and practical for those with specific needs.

I initially tried a slider type dimmer for my LED track lights, but was disappointed with the lowest level of brightness it provided. However, after ordering this rotary type dimmer, I was pleased to find that it met my expectations. The LEDs now dim to a candle light level, creating a cozy and inviting ambiance. The installation process was easy and hassle-free, leaving me very satisfied with my purchase.

One of the standout features of this dimmer switch is the ability to choose the brightness of the lights. This flexibility allows users to customize the lighting to their preference, making it ideal for various settings such as a new shed installation.

In terms of usability, this dimmer switch is user-friendly and accessible to all. Even as a housewife, I was able to install it without the help of my husband. The ease of installation and operation means that I no longer have to rely on my husband or worry about potential fire hazards. This dimmer switch provides peace of mind and convenience, effectively replacing the need for a fire extinguisher.

Operating this dimmer switch is simple and straightforward. By rotating it clockwise, the light becomes brighter, while rotating it counter clockwise causes the light to dim. The push on/off feature is a convenient addition, allowing users to easily turn off the lights and have the switch remember their last setting.

I was initially skeptical about the "flickering reviews" of this product, but after trying it in my old apartment with outdated electrical wiring, I can confidently say that it works perfectly fine. Despite the negative claims from some, I believe that these reviews may be from competitors trying to tarnish the product's reputation. The positive reviews and affordable price convinced me to give it a chance, and I'm glad I did. If you're uncertain, you can always return it if it doesn't meet your expectations.

I ordered seven of these switches yesterday afternoon and received them early this morning. My husband quickly installed three of them, and they all work great. Initially, the dimmer had limited range, but I discovered that there is a dial where you can adjust the brightness level. By turning the light on, sliding the dimmer to the bottom, and then adjusting the dial to the desired brightness for the lowest range, you can achieve the desired lighting. Additionally, I appreciate the blue LED feature, as it acts as a small nightlight when the lights are off. If anything changes with the remaining four switches, I'll update my review. For now, I'm impressed with the cost and quality, especially compared to the expensive options at big box stores, and I wouldn't hesitate to recommend these switches to others.

I had a pleasant experience installing this switch, despite having limited electrical knowledge. I purchased it specifically for a dimmable LED light that required an LED switch, and it worked perfectly. Not only is it half the price of the options available at big box hardware stores, but it also has a bright indicator light that can serve as a guiding light in the dark. However, I wouldn't recommend using it for a bedroom light fixture due to the brightness of the indicator light. The operation of the switch is smooth, with no flickering, and I appreciate that it stays at the last level set instead of having to slide it all the way down for "off." Overall, I'm very happy with this switch and would definitely recommend it.

This device is a combination of a duplex, USB chargers with two inputs, and a light switch/dimmer. It even has a sensitivity adjustment to prevent flickering when used with dimmable LED or CFL bulbs. It can also be used as a three-way switch. Initially, I thought I had a defective device because the light I had wired to the switch didn't work. However, I soon realized that there was a sensitivity switch that needed to be adjusted. Once I made the adjustment, the lights turned on perfectly. So, make sure to check the sensitivity switch before giving up on the device. Some reviews have mentioned dissatisfaction with the blue pilot light, but personally, I find it to be a great feature. It helps locate the switch in the dark and indicates whether the switch is on or off, which is particularly helpful if the light bulb is faulty or if the dimmer is set too low for the light to be visible. Overall, this switch is of nice quality and comes at a fair price.

The instructions provided with the product were clear and easy to follow, making the installation process a breeze. I was able to set it up without any hassle. Additionally, the delivery was prompt, and I received the product earlier than expected, which was a pleasant surprise.

However, I did encounter a minor issue with the slide bar used to adjust the light. It was quite tight and didn't slide smoothly as I would have liked. Despite this drawback, the overall functionality of the product was satisfactory, and it served its purpose effectively.

As for the installation process, it was relatively straightforward for a single pole configuration, as per the provided instructions. However, when I had an electrician install multiple switches in a 3-way configuration, I noticed some flickering issues. Upon consulting the electrician, I learned that the flickering was likely due to the fact that my LEDs were not dimmable. After replacing the bulbs and fixtures with dimmable ones, the flickering problem disappeared. I still have a few more replacements to make, but I am confident that once the dimmable LEDs arrive, the flickering issue will be completely resolved. Additionally, I noticed a buzzing sound when using a high-wattage non-dimmable LED from one of the switches.

I recently purchased this dimmer switch for a dorm room headboard project and I must say, I am extremely satisfied with my purchase. One of the main reasons I chose this switch was because I needed a LED light dimmer switch that wasn't too deep, which can be quite difficult to find. Fortunately, this switch fit perfectly into a shallow 1-gang box that was only 1.25" deep. Despite the limited space, the switch fit nicely and was easy to install.

One of my concerns was whether the dimmer switch would work well with LED lights. In the past, I have had issues with dimmer switches not being compatible with LED bulbs. However, this switch proved to be exceptional. I paired it with 2x EcoSmart 40W dimmable bulbs from HD and the dimmer worked flawlessly. It was able to dim the LED lights from full brightness to full off, and could also be adjusted for different dimming levels. I was impressed with the performance and functionality of the switch.

Another feature that I really appreciate is the little light at the top of the paddle switch. This light can be turned on or off, and I chose to leave it on since it wasn't too bright or annoying. This is especially helpful considering the switch is black and can be difficult to find in the dark. The light serves as a useful indicator and adds to the overall convenience of the switch.

The setup of the switch is also worth mentioning. To access the two switches, you simply need to pop off the paddle. One switch controls the indicator light, allowing you to turn it on or off as per your preference. The other switch sets the minimum brightness based on the type of bulbs you have. Although I didn't notice much difference among the three settings for minimum brightness, I am more than satisfied with the default setting. Additionally, the switch comes with a nice screwless faceplate, which adds a sleek and modern touch to the overall appearance.

In terms of build quality, I was impressed with the thinness of the switch body. Having used various dimmer switches in the past, I can confidently say that this one is among the thinnest I have encountered. The backwire terminals also deserve praise, as they ensure a tight fit. I personally prefer these terminals over wire leads. Furthermore, the screws (terminal and attachment) are industry-standard #1 combination, which means that with the right screwdriver, you can achieve the perfect amount of torque during installation.

After struggling with the installation, I finally realized that the black wire on the dimmer is the common wire, which was clearly mentioned in the directions. Once I figured it out, the installation process became much easier. The dimmer switch now works great, and I am satisfied with its performance.

I had to replace an older dimmer switch because it was causing flickering issues with our LED bulbs. An electrician recommended upgrading to this switch, and I am happy to say that it solved the problem. The switch works like a charm, and I am pleased with the outcome.

I recently replaced a 20-year-old knob dimmer that was not compatible with LED bulbs. In addition to upgrading the dimmer switch, I also replaced the old ivory colored plastic plate with a new metal plate. The new switch works perfectly with LED bulbs, and the metal plate adds a modern touch to the overall aesthetic.

We are extremely satisfied with the dimmer switches we purchased. They work flawlessly in our 3-way application, providing the desired level of dimming control. Additionally, we use G9 Xenon Bulbs, and the dimmer is compatible with them as well. Overall, we have no complaints about the performance of these switches.

I have successfully used this dimmer to dim a candelabra with five 100-watt-equivalent LED bulbs. While it would have been nice to have a sensitivity control option, the lack of it is not significant enough for me to consider replacing the dimmer. It still meets my needs adequately.

The Caseta outlet mounted dimmable on/off power switch is a reliable and convenient choice for those looking to add dimming functionality to their lights without the need for complicated installations or additional accessories. While there may be other no-name brand switches available that offer remote control or app compatibility, the Caseta switch stands out as a brand name dimmable switch that is easy to use and provides the desired functionality.

One of the standout features of the Caseta switch is its simple design. It can be easily plugged into an outlet, and lights can be plugged into it, allowing for easy on/off and dimming control. The switch features four push buttons, two white and two dark gray. The top white button turns the light on, while the bottom dark gray button turns it off. The middle two buttons, split diagonally, allow for increasing or decreasing the brightness of the light. The switch provides a smooth fade-in and fade-out effect when the light is powered on or off.

The versatility of the Caseta switch is another positive. It can be used as a standalone product or with the included wireless remote control, which adds convenience by allowing users to control the lights from a distance. The remote control also includes a fifth button that can memorize a favorite light brightness level, allowing for quick access to preferred settings.

Contrary to the product description, it is not necessary to purchase an expensive hub to use the Caseta switch. It functions perfectly fine without any additional accessories, including app control or compatibility with personal assistants like Alexa. While personal assistants and app control may be useful for some, the simplicity of the Caseta switch's standalone functionality is a strong selling point.

While the Caseta switch has many positive aspects, there are a few areas for improvement. Firstly, the white on button should have a soft glow to make it easier to locate in the dark. Secondly, a memory function would be beneficial, allowing users to set a preset light level. Lastly, the design of the switch requires the use of the bottom outlet on a wall plug, causing the device to rock slightly when pressed. This can be resolved by using a Hug-A-Plug adapter to route the cord to the side and regain access to the bottom outlet.

The inclusion of the remote control is a nice addition, although not necessary for everyone. The remote replicates the functions of the wall switch and includes the option to memorize a favorite light brightness level. However, the remote control has a few design flaws. Similar to Apple TV's slim remote, it is easy to hold it upside-down, resulting in incorrect button presses. Additionally, the remote is all one shade of white, which deviates from the intuitive color scheme of the wall switch.

I recently installed these switches in my kitchen to control my LED recessed lights, and I couldn't be happier with the results. The installation was a breeze, as I already had a 3 gang box and only needed to replace one toggle switch. I simply purchased a new cover plate and everything fit perfectly.

The switch and dimmer function flawlessly, providing smooth and precise control over my LED lights. It's worth noting that these switches are specifically designed for LED lights, so make sure you use them with dimmable LED bulbs. I made the mistake of trying them with halogen lights, which resulted in flickering and buzzing. However, I plan to switch all my lights to LED anyway, so this is not a major concern for me.

In addition to my recessed lights, I also used this dimmer for my LED chandelier, and it works great. The only drawback I've experienced is getting used to the sideways "press" instead of the traditional flipping motion. I often find myself instinctively trying to flip a switch that isn't there. If I were to do it again, I would consider finding a dimmer with a flip switch to maintain consistency throughout my house. However, this is a personal preference and doesn't reflect the quality of the dimmer itself. Overall, this dimmer is a high-quality product that performs exactly as described.

I also installed this dimmer on a single pole switch for my dining room fixture, which has five 60W equivalent LED bulbs. I've seen some reviews claiming that this dimmer doesn't work well with LED bulbs, but I haven't encountered any issues. It's important to note that not all LED bulbs are dimmable, so make sure you have dimmable LED bulbs before using this dimmer. Additionally, following the instructions for the sensitivity adjustment is crucial, especially when using LED lights. Initially, my dimmer didn't work because the person who installed it didn't perform the sensitivity adjustment. However, after reading the instructions and watching some videos, I realized my mistake and adjusted the trim dial accordingly. This made a significant difference, and now the dimmer works perfectly. I'm extremely satisfied with the performance of this dimmer.

The installation process was surprisingly quick and straightforward, much to the surprise of my wife. The three-way wire is conveniently labeled, making it easy to identify and cap off if necessary. I did encounter a bit of confusion with the wiring in my house, and one wire even came loose during the removal of the old switch, but I managed to navigate through it. The only minor gripe I have is that I wish the screws provided were longer to securely fasten the switch to the gang box. However, this didn't significantly impact the overall installation process.

The adjustment wheel on the dimmer is a thoughtful feature, allowing me to fine-tune the settings to my preference. It did take a bit of time to figure out the perfect setting, but once I found that sweet spot, I was able to achieve the desired level of brightness. At the lowest (dimmest) setting, I noticed that the lights momentarily go out when I turn on certain appliances like the garbage disposal or when the air conditioner kicks in. This is due to the voltage requirements of LED lights and the initial energy draw of appliances. However, the duration of the lights going out is very brief, similar to a slow blink, and doesn't bother me.