I Tested And Reviewed 10 Best Led Replacement For Fluorescent Tubes (2023)

I recently undertook a project to modify the light fixtures in my garage and basement, and I am extremely satisfied with the results. The process of removing the ballasts and replacing them with new tombstones was simple and went smoothly. I opted for frosted tubes in some fixtures and clear tubes in others, and I am happy with both choices. One of the standout features of these LED tubes is their instant-on capability and lack of flickering, even in cold weather. Additionally, they operate quietly, which is a significant improvement over the noise of fluorescent fixtures.

To ensure compatibility and avoid confusion, I would recommend labeling any converted fixtures to indicate the specific method used for the conversion. This is because the methods are not interchangeable and depend on the type of LED tube purchased.

In terms of ease of installation, converting from a transformer and starter setup is easier than from a ballast type. However, regardless of the initial setup, I was able to significantly increase the amount of light in my garage without much effort. I am thrilled with the outcome and appreciate the energy efficiency of these LED lights. Although I have not yet tested them in cold weather, I am hopeful that they will start up just as easily as they do in warmer months.

The brightness of these LED bulbs is impressive and has made a substantial difference in my garage and workshop. Additionally, the fact that they are made of plastic material alleviates any concerns about broken glass. I highly recommend these LED bulbs for anyone considering an upgrade.

I have thus far used approximately one-third of the LED tubes in the pack I purchased, replacing fluorescents as they go bad. The installation process is straightforward: remove the ballast, install the line on one end of the fixture and the neutral on the other end for each set of tombstones. These LED tubes are not only brighter than fluorescent lamps but also consume less energy and remain cooler while in use. Furthermore, their plastic construction makes them more durable and less prone to shattering compared to glass tubes, which is particularly beneficial in workshop environments. I cannot comment on their performance in cold temperatures yet, as I have not experienced winter since the installation.

I was initially apprehensive about bypassing the ballast, but found the process to be quite simple. Just disconnect the power, cut the ballast wires at the base, and connect the hot wire (black) to one end of the fixture and the neutral wire (white) to the other end using the leftover wire from the ballast. A wire nut or two may be necessary. The brightness of these LED tubes far surpasses that of the previous T12s, and their energy efficiency is also significantly improved.

I recently replaced my ballast with the Magnetek446-L-SLH-TC-P, which is on the approved list for this product. The light output from the 3000K warm white tubes is significantly brighter than the old fluorescent tubes I had before, almost too bright for a two bulb fixture over a work area. I checked all four tubes that I purchased and they are all working perfectly. Even if you have to replace the ballast, the increase in light output is definitely worth the cost and effort.

I was tired of my old bulbs burning out quickly and wanted to switch to LEDs without replacing the fixtures or rewiring. I decided to try these bulbs and they worked perfectly. They seem brighter than any older bulbs I had before, especially the ones from a well-known company that starts with S and ends with A. I've only been using these bulbs for 2 weeks, but I am very impressed so far. The packaging was also excellent, with each bulb individually boxed and securely packed in another box for shipping.

I didn't want to bother with changing the ballast, so I simply replaced my old bulbs with these LEDs. They light up faster and are brighter, making the installation process quick and easy.

I had a halogen T12 utility light burn out and wanted to replace it with a more energy-efficient option. These LEDs have been great so far! I didn't have to mess around with any electrical work, I just removed the old bulb and put these in. The installation was easy and the brightness is even better than the old bulb. I was initially worried that I ordered the wrong type because these LEDs are slimmer in diameter, but they fit perfectly.

Unlike the direct wire options available at Home Depot that don't work, these bulbs actually work as intended. You can see the comparison between these bulbs and standard ones in the attached pictures.

I am extremely satisfied with these LED replacement tubes. I initially purchased them to replace the bulbs and ballasts in my ballast-type fixtures, as they were not working properly. Unfortunately, the first shipment of ten bulbs arrived in a poorly handled box that had been dropped, resulting in four of the bulbs being damaged beyond use. I promptly reported this to Amazon, and they sent me a replacement shipment, which arrived in three days.

The package includes clear instructions on how to convert the old fixtures to LED, a process that involves removing the ballast. These LED bulbs only use power at one end, so the wires on the other end of the fixture are cut off and removed from the tombstones. I reused the tombstones without wiring, which are solely responsible for securing one end of the bulb. To simplify the wiring and minimize crude connections, I installed new non-shunted tombstones for the powered ends and connected them in a parallel fashion. The only wire nuts I used were for connecting the main power and neutral wires from the switch, while the bare copper wire for the ground was left undisturbed. There are numerous YouTube videos available that provide step-by-step instructions on how to complete this process.

I am impressed with the brightness of these LED bulbs, which do not produce any humming sounds. Additionally, they are made of plastic, not glass, which gives me peace of mind regarding their durability. Even though my fixtures can hold four bulbs, I found that two bulbs provide sufficient light and are as bright as four fluorescent bulbs. It has been a couple of months since I installed these bulbs, and they are holding up well. I would definitely purchase them again.

Update: As of July 1, 2022, I have been using these T-8 LED replacements for two years without experiencing any failures or malfunctions. Even the fixtures in my shop that are left on for 24 hours a day have performed exceptionally well and do not generate excessive heat. Converting a fluorescent fixture to be compatible with these bulbs is a straightforward process, as the bulbs only require power at one end and the ballast is not utilized. Each individual bulb comes with comprehensive and easy-to-follow instructions. Overall, I am extremely pleased with the performance of these LED bulbs.

I recently purchased a set of 12 LED bulbs to install in my garage, and I must say, I am extremely satisfied with the results. The lighting provided by these bulbs is far superior to the old fluorescent bulbs I had previously installed. Not only is the lighting brighter, but it also turns on instantly, eliminating the slow startup time I experienced before. Additionally, I have noticed a significant decrease in my power consumption, almost cutting it in half.

One concern I had before purchasing these bulbs was whether the lighting would be too direct, creating spotlights instead of a consistent glow across the entire space. However, I am happy to report that this has not been an issue at all. I have been able to work directly and indirectly under the lights in my 1000 sq/ft garage without any shadows interfering with my workspace.

It is important to note that the installation process does require some work and familiarity with electrical fixtures. It is crucial to follow local codes and regulations, and if unsure, it is recommended to hire a professional electrician. I personally created a video demonstrating the installation process, including real-time installation in a 2-bulb fixture. It took me approximately 6 minutes to complete the installation. The video can be found on my website and YouTube channel, in full 4k resolution.

I also purchased these bulbs on behalf of a relative who had never done a ballast bypass before. Despite their limited knowledge about lighting, they were confident in their ability to wire outlets and pull wire. The specific bulbs I purchased are LED replacements for T8 or T12 fluorescent tubes, and they eliminate the need for a ballast altogether. The difference between T8 and T12 is a 1/2" difference in tube diameter and the type of ballast used. However, these differences do not affect the installation of these bulbs, as they fit perfectly in a 4' fixture.

One important aspect to note is that these bulbs are dual-ended, unlike most LED replacements that are single-ended. This means that the power and neutral wires are connected to opposite ends of the bulb. It is a less common configuration, but it does not pose any significant challenges during installation.

During my first installation, I encountered some difficulties and made two mistakes, which took me about 20 minutes to rectify. However, once I became familiar with the process, the subsequent installations only took around 10 minutes each. I did have to replace four tombstones, which are the little pieces that hold the prongs of the bulb in place. I found affordable replacements at a local big-box store.

I recently replaced my fluorescent lights with these LED bulbs and I couldn't be happier with the results. The LED bulbs are much brighter than the previous ones and provide excellent lighting in my space. The installation process was simple and easy, as I was able to retrofit the existing fixture without any hassle. However, it's worth noting that you will need un-shunted ends for the installation, so keep that in mind.

One of the standout features of these LED bulbs is their energy efficiency. They consume less energy compared to traditional bulbs, making them a cost-effective choice in the long run. Additionally, the quality of the light emitted by these bulbs is impressive. They provide a clear and bright illumination that enhances visibility in my closet.

I also appreciate the long service life of these LED bulbs. With their durability and reliability, I expect to replace them much less frequently than the old fluorescent lights. This saves me both time and money in the long term.

Another aspect that impressed me was the packaging of these bulbs. Each light tube came in a sturdy cardboard tube, ensuring their safety during transportation. Additionally, the manufacturer went the extra mile by installing pin protectors on the pins at each end of the tube, further ensuring that the bulbs arrived in pristine condition. This attention to detail in packaging reflects the manufacturer's commitment to quality.

The lights being reviewed here do not have rotation adjustment capabilities, which can be a drawback for fixtures that do not have vertical electrical connections. This means that it may be challenging to orient the lights properly in fixtures where the light needs to point downwards. However, if your fixtures have vertically mounted tombstone connectors, then these lights should work fine.

On the positive side, these lights are very bright, which is exactly what the reviewer was looking for. They are easy to install by cutting the old ballast wires and connecting them to 110ac. This makes it a quick and hassle-free home maintenance project.

The reviewer also mentions that they had installed similar fixtures in their garage about 10 years ago, but the ballasts are starting to fail. They found that these LED bulbs are a cheaper alternative to replacing the ballast. The bulbs are as bright or even brighter than the old ones, with a sharper, slightly blue color that is great for the garage.

Additionally, the reviewer mentions that their local power company offers rebates on LED bulbs, which can make them even more cost-effective. It's worth checking with your own power company to see if similar rebates are available.

The installation process for these bulbs involves bypassing/removing the ballast and wiring all the sockets on one end of the fixture to one 120V AC line (black wire) and all the sockets on the opposite end to the other incoming AC line (white wire). The reviewer provides some tips for the installation process, such as making note of where the incoming power connects and using orange wire nuts if necessary. It's important to disconnect power from the fixture before starting the work.

Lastly, the reviewer mentions that these bulbs have been working well even in freezing temperatures, with no dimming or flickering issues like the old bulbs.

I recently purchased and installed these 44w LED tube lights for my shop, and I am extremely pleased with the results. Installation was straightforward, especially if you have some electrical knowledge. I was able to install 8 out of the 12 bulbs I purchased on my own, and it took me about 10 minutes per fixture. Having a helper would have made the process even faster.

The first thing I noticed after installing these LED bulbs was the significant increase in brightness compared to the fluorescent bulbs I had previously. The lighting is much brighter and provides a clear, pure white light that spreads evenly across the space. This is a vast improvement from the shadows and inadequate lighting I experienced with the previous lights.

One of the best features of these LED bulbs is the absence of the annoying buzzing sound that often comes from ballasts. It's a relief to have a quiet and peaceful working environment without any distracting noises.

I do want to mention that I noticed some sagging in the middle of the fixtures after installation. While it didn't cause any immediate problems, I plan to install the center supports to prevent any potential issues down the road. It's always better to be proactive and ensure the longevity of the fixtures.

The packaging of these bulbs was excellent, and I received them without any breakage. This shows that the company takes care to ensure the safe delivery of their products. I am so satisfied with these LED bulbs that I am planning to purchase 12 more to cover the other side of my shop.

However, after installing all the bulbs, I found that the brightness was a little too intense for my liking. To adjust the lighting, I started using only one bulb per fixture, and it turned out to be the perfect level of brightness. The versatility of these bulbs is impressive, as they work just as well with a single bulb as they do with multiple ones. This means I won't have to purchase additional bulbs, which is a cost-saving advantage.

In addition to adjusting the number of bulbs, I also found that slightly rotating the tubes away from each other helped to spread the light out over a larger area and eliminate any shadows. This simple adjustment made a significant difference in light dispersal and improved the overall lighting experience in my shop.

Shipping was quick, and the tubes arrived earlier than expected, well-protected in the packaging. Each tube lit up instantly and completely, confirming the high quality of the product. I am genuinely impressed with the results and consider this purchase to be one of the best investments I've made for my shop in a long time.

In fact, I am so pleased with these LED tube lights that I have decided to add more fixtures and install these tubes throughout my shop. The longer I use them, the more I appreciate their bright, clean, and efficient light source. It's fantastic to have instant bright white light as soon as I flick the switch, whether it's in the evening or early morning.

If you're looking for a reliable, energy-efficient lighting solution that provides bright, clean, and quiet light, I highly recommend considering these LED tube lights. The ease of installation, the brightness, and the overall quality make them a great choice for any workspace.

I am extremely impressed with these daylight bulbs. The light they emit is very bright and well-balanced, without being overly blue. Once you experience the quality of daylight bulbs, you will never want to go back to lower color temperature lights for any kind of task or reading.

One minor drawback is that these bulbs can keep you awake due to their brightness. However, I have found a solution by using soft white bulbs in the evening to create a more relaxed atmosphere.

In terms of quality, these lights are top-notch. Despite some rough handling during delivery, all 8 lamps arrived in perfect condition and worked flawlessly. They are so bright that I was able to rewire the pull switch in my fixture to turn off one bulb, and it still provided ample lighting. In fact, one bulb can easily replace two T12/40 bulbs.

I got creative with these bulbs by painting an old fixture with a hammered paint, giving it an antique brass appearance. I also used decorator chain with a similar look to create a swag lamp. The transformation from industrial to designer piece was remarkable.

Another great use for these bulbs is indoor gardening. With their high color temperature and a color rendering index of 85, I believe they provide enough light in the critical ranges for photosynthesis. I would love to see someone with test equipment confirm this in a review.

In fact, I have been using these bulbs to keep my herb garden alive indoors during the winter, and the plants are thriving. They have started growing upward towards the bulbs, which is a clear sign of their effectiveness. Even a struggling succulent that we moved under this light showed noticeable growth within just a couple of days.

Aside from their impressive performance, these bulbs are also incredibly easy to install. All you need are wire cutters/strippers and wire nuts to convert an old ballast fixture to accept these bulbs. I have installed 16 of these bulbs in a rec room for over 2 years, and not a single one has stopped working.

I have been a parrot breeder for over 30 years, and I recently decided to switch from T12 fixtures to LED bulbs to provide better lighting for my birds. After purchasing a set of 16 LED bulbs, I found that removing the ballasts and replacing them with these bulbs was a simple task. The difference in brightness was remarkable, and the 6000K daylight white provided by these bulbs was exactly what my parrots needed.

Impressed with the results, I decided to buy another set of these bulbs to light up the rest of my basement. Not only do these bulbs cost less to operate, but they also provide significantly more lighting for a longer period of time. In fact, they are more affordable compared to other options available in the market. I highly recommend these bulbs for anyone looking to convert their old T12 fixtures to LED lighting and in need of bright daylight lighting.

Since installing these bulbs, I have noticed several benefits. Firstly, there has been no buzzing or flickering, and the lights come on instantly. Secondly, my basement is now brighter than ever before with fluorescent bulbs, and my electric bill has significantly decreased. The savings in electricity usage are not only due to the lower electrical requirements of the LED bulbs but also because of the elimination of ballasts, which consume additional electricity.

Furthermore, the lifespan of these bulbs is much longer compared to fluorescent bulbs. I have been using them for over two years now, and not a single bulb has failed or burned out. They have been operating for 12 to 16 hours per day without any issues. In terms of cost savings, I estimate that I have easily saved over $50 per month on my electric bill since switching to these LED bulbs.

To conclude, I couldn't be happier with these LED bulbs. They have consistently provided excellent lighting for my parrots, and the cost savings on my electric bill have been substantial. If my opinion of these bulbs changes in the future, I will update my review. Overall, I highly recommend these LED bulbs for their brightness, energy efficiency, and long lifespan.

I recently purchased the Fulight LED fluorescent tube replacements for my undercabinet lighting fixtures, and I must say, I am highly impressed with their performance.

One of the standout features of these LED tubes is their rotating end caps. This is a unique feature that I have not found in any other LED tubes. It proved to be extremely useful for my 1" thick undercabinet fixtures with horizontally mounted sockets. I was able to adjust the rotation of the bulbs to direct the light precisely where I needed it, effectively illuminating my work surface without leaving any dimly lit areas.

When it comes to sizing, I initially ordered the 11 7/8" long tubes, assuming they would fit my fixtures. However, it turned out that my fluorescent bulbs were 11 13/16" long, so the LED tubes didn't fit. Fortunately, I was able to carefully clip off the ends of the pins to make them fit. I recommend measuring your existing bulbs accurately before purchasing to avoid any sizing issues.

In terms of lighting quality, the LED tubes from Fulight provide a much crisper and whiter light compared to the fluorescent tubes. Even though both the fluorescent and LED tubes I evaluated were 3000K, the LED tubes appeared significantly brighter and more vibrant. The difference in lighting quality is truly noticeable and enhances the overall aesthetic of the space.

Installation was a breeze, although some additional wire nuts or wire crimp connectors may be needed depending on your specific setup. The instructions provided are not overly detailed, but they are straightforward and easy to follow. I installed these LED tubes in my Juno UPF undercabinet fixtures without any issues.

I highly recommend the Fulight LED fluorescent tube replacements for anyone looking to upgrade their undercabinet lighting fixtures. They offer exceptional performance, easy installation, and superior lighting quality that will undoubtedly enhance any space.