I Tested And Reviewed 7 Best Light Bulb Changer For High Ceilings (2023)

I recently purchased the DocaPole for my 90s house and I must say, it has been a game-changer. I had been struggling with changing the bulbs in my soaring archways that were difficult to reach, but this product has made the task so much easier.

Firstly, the DocaPole is incredibly sturdy and well-made. I was initially hesitant about purchasing such a long pole, but it proved to be a great investment. The suction cup attachment securely holds the bulbs, ensuring that they don't slip or fall during the changing process.

To make the task even simpler, I found it helpful to collapse the pole and stand it upright before attaching the bulb. This way, I could easily extend the necessary sections without swinging the bulb around on the end of a 20-foot stick. It's important to note that the lower sections of the pole are more rigid, so it's best to extend the upper sections first before attaching the bulb.

One thing I discovered during my experience is that the string attached to the suction cup is useful when removing bulbs but can be a bit cumbersome when inserting new ones. To avoid tangling, it's best to unwind only as much string as needed and hold it against the pole while twisting to prevent it from winding up. If you have pets, it's wise to keep them away as the string can become a hazard.

Although not mentioned in the instructions, I realized the importance of safety while using the DocaPole. When working at heights, especially with heavy bulbs, it's a good idea to prioritize safety measures. Wearing a bicycle helmet or other protective gear can help prevent any potential accidents or injuries.

I recently had to change a recessed flood light bulb in my living room, which has a ridiculously high ceiling. The last time I attempted this task, I used an extension ladder and felt extremely unsafe. This time, I was determined to find a safer solution and purchased this product based on the mostly positive reviews. I was initially skeptical, but to my surprise, it worked perfectly on the first try!

One important tip when using this product is to adjust the "tines" or "fingers" to fit the bulb you are removing. If your replacement bulb is the same size and shape, use it to adjust the tines before attempting the removal. It's better to have a slightly tighter fit, as the tines do flex a bit. However, if the bulbs are different sizes and shapes, there may be some guesswork involved, and it might take a few tries to get it right. Nevertheless, I believe that most users will be able to figure it out within three attempts.

When installing the replacement bulb, make sure that the bulb and socket are lined up straight. Using a long extension pole, it's easy to come in at a slight angle, which can cause problems. I had no trouble fitting the "grabber" onto my extension pole, and I secured it tightly with the provided set screw. However, I made the mistake of not doing this with a second bulb I replaced in a lower ceiling, and the "grabber" ended up twisting on me. So, I highly recommend using the set screw to ensure a secure attachment.

Considering that this product not only worked flawlessly on the first try but also saved me from a dangerous ladder-climbing experience, I believe it offers excellent value for money. As for the review form's request to rate the product's "suction power," I must clarify that it doesn't operate using suction. In my experience, suction-powered "grabbers" are not reliable, so I would advise avoiding them.

I recently purchased this amazing tool and I must say, it is a game-changer! Before finding this, I was faced with the dilemma of either hiring a handyman or purchasing a tall ladder to change the bulbs in my high ceiling fan light fixture. But with this product, I was able to easily change all the bulbs in just 5 minutes! The value for money is fantastic and I am so grateful to have found the perfect tool for the job.

The basket attachment for regular incandescent/LED bulbs worked perfectly. It securely holds the bulbs and makes it effortless to twist them in and out of the light socket. Even though I have a tall ceiling and a short ceiling fan downrod, I didn't even need to fully extend the handle, and I'm only 5'2"! The suction cup feature is an added bonus, although I haven't had the need to use it yet.

I also discovered that this tool works wonders for cleaning security cameras. By stuffing a microfiber cloth in the end and spraying some Windex, I was able to easily clean the small dome of the camera. The spring expands to envelop the camera, allowing me to scrub difficult spots. It works just as well as purpose-built devices that cost twice as much.

Furthermore, this tool has proven to be a lifesaver for my grandmother and me. We have a large telephone pole with a high mercury "yard" light attached to it between our houses. In the past, we had to rent expensive bucket trucks to change the bulb, but now we can do it ourselves from the ground. This tool has saved us a significant amount of money and will continue to be useful whenever the bulb needs replacing.

In terms of durability, the pole is sturdy and not wobbly at all, even when fully extended. The only minor issue I encountered was that the thumb screw was not tight enough on the first attempt, causing the basket to unthread. It would be beneficial if the connections between the pole and attachments were designed as couplers instead of threads to prevent this situation.

I recently purchased the Bayco mini flood light bulb changer kit and I must say, it has been a game-changer for me. Previously, replacing bulbs on my 30-feet high ceiling was a real hassle. I had to use a huge A-frame ladder and even then, it was difficult to reach the light fixture in the middle of the ceiling. I tried a suction cup type bulb changer last year, but it was a disaster. It was hard to tell if the bulb was securely attached and I ended up dropping and breaking multiple bulbs.

However, the Bayco kit has provided me with the perfect solution. The design of the "fingers" that slip over the bulb provides a clear indication when the bulb is securely attached. The friction pads on the fingers do an excellent job of holding the bulb firmly, making it easy to screw it in or out without any fear of dropping it. I must congratulate the engineers at Bayco for coming up with such an excellent solution.

Interestingly, the kit also includes a suction cup changer, although I'm not sure why. I found the grabber tools included in the kit to be much more effective and would recommend sticking to them. With this kit, there is no chance of dropping the bulb.

I was initially skeptical about whether the kit would work, but it exceeded my expectations. I had flood lights that needed replacing at a height of over 20 feet, and I decided to try it out on the ground first. I inserted a new flood light into the spring holder made for floods and adjusted the springs to form a perfect circle for easy attachment. I practiced removing the spring holder from the bulb, and I discovered that removing it at an angle instead of straight made it much easier. It worked flawlessly.

This kit is a lifesaver for me. I have several light bulbs in my new home that are out of reach, with some areas having 24-foot ceilings. The kit performs exactly as described. The suction cup mount works best when slightly wet to form a better seal. There is also a string attached to a tab that you can pull to release the seal and detach the light bulb.

However, there are a couple of things to note. If the light bulbs have been screwed in too tightly previously, no tool like this will be able to remove them. In such cases, it may be necessary to call a professional for assistance. Additionally, installing bulbs with this kit can be a bit challenging, particularly for Edison-based bulbs with a tight connection. It requires practice and a steady hand to achieve the perfect alignment, especially when working at heights of 20+ feet. Pushing and turning the bulb simultaneously seems to work best. Using a quality pole with this kit allows you to "feel" when it starts to thread.

I recently purchased this bulb changer pole and I must say, it exceeded my expectations. I had two high mounted outdoor flood lights that were extremely difficult to change, but the suction cup on the bulb changer I previously bought just wasn't strong enough. Thankfully, this pole comes with a larger spring loaded basket with rubber grips, which made the bulb changing process a breeze. Although I still needed to use a ladder in my situation, for most people, the pole's length should be sufficient to reach their high up bulbs without needing additional assistance.

I found a couple of helpful tips while using this pole. Firstly, if the bulb is really stuck, I recommend giving the pole a sudden jerky motion to free it before unscrewing it slowly. Secondly, I highly recommend using LED replacement bulbs to avoid having to deal with this task again for a long time.

The main reason I purchased this pole was because my driveway is at a steep incline, making it impossible to use a ladder. Additionally, the area around my garage is quite dark at night, even with street lights. Every summer, local kids tend to tag my brick pillars, curb, and the retaining wall across the street, causing the city to spend a significant amount of money on removal. I didn't want to pay a professional to change the floodlights, so I decided to give this pole a try.

The floodlights I needed to replace were large and very heavy, making it challenging to use the suction cup attachment. However, the floodlight accessory included with the pole proved to be the perfect solution. At first, I was skeptical if it would stretch enough to fit the lights, but after consulting the instructions, I followed the recommended method of pulling the accessory on one side first and then stretching and pulling it onto the rest of the light. It worked like a charm!

When it came time to actually replace the old lights, it took some maneuvering to hook the pole onto one side of the light and then adjust it until it fit over the entire light. Surprisingly, the old lights, which had been up there for 12-15 years, came out rather easily without shattering. I was relieved because they were incredibly thin and lightweight. With a little more force, they would have easily shattered.

Installing the new lights was a fairly simple process, although initially, they didn't feel securely tightened into the sockets. However, after a few hours, the entire side of my house was brightly illuminated, resembling a Nightsun used by police helicopters.

If you decide to purchase this pole, I highly recommend reading the instructions carefully to avoid any mishaps. Had I not done so, I might have accidentally broken the floodlight accessory. Overall, I am extremely satisfied with this bulb changer pole and it has made the task of replacing high mounted outdoor floodlights much easier and more efficient.

I recently conducted extensive research on various bulb changers and came across this particular product that seemed to be the most suitable for my needs. Most of the bulb changers available in the market are designed for flood lights, which have a flat front on the bulb. However, my requirement was to change standard A19 light bulbs in a high ceiling fan.

Although none of the products specifically mentioned compatibility with A19 bulbs, I decided to give this changer a try. And I must say, it exceeded my expectations. The changer can be easily screwed onto the end of a standard mop or broom (as long as it's not too large) and it comes with a thumbscrew that allows for secure tightening. This feature is particularly important as it eliminates the common issue faced with many changers where the bulb tends to twist while being screwed.

Using this changer is a breeze. Simply slip it over the bulb and it securely grips it. Then, lift it up to the socket and gently twist to screw it in. I never once felt it slip or lose grip. In fact, it felt a bit tight, which made me skeptical about removing it without causing any damage. However, I successfully removed it four times in a row with slow and steady pulling.

Additionally, I came across another user review that praised this product for its convenience. The reviewer had to replace four bulbs in a ceiling fan that was 12 feet high. They attached the changer to a telescoping painter's pole and secured it with a wing nut to prevent rotation. The gadget worked flawlessly, easily slipping over the A19 bulbs and providing a tight grip. The reviewer was able to replace the old bulbs within minutes, and the process was equally smooth for installing new clear A19 LED bulbs. The best part was avoiding the hassle of using a heavy ladder and rearranging furniture to reach the ceiling fan. This product proved to be a great solution for their needs.

I recently purchased the bulb changer and it worked perfectly for my needs. I was able to easily attach it to a 12 ft painters pole without any issues. Using it, I successfully changed a canned light bulb that was approximately 18 feet high, as well as a candelabra bulb in my ceiling fan that was about 15 ft up.

The only slight difficulty I encountered was with the candelabra bulb, as the standard incandescent gripper included in the kit was too big to grasp it. However, I found a simple solution by inserting some bubble wrap into the basket of the gripper, which filled in the space and allowed me to easily extract the old bulb. Putting in the new one was a bit more challenging, but I was able to make it work.

One great feature of this bulb changer is the thumb screws on the sides of each attachment. These screws allow you to tighten the attachments against the pole, preventing them from rotating during use.