I Tested And Reviewed 8 Best Mattress Cover For Bed Bugs (2023)

I recently purchased multiple mattress encasements and a box spring encasement from this company, and I must say, they have been an absolute blessing. These encasements have successfully prevented any tiny black specs from getting through, providing me with a great sense of satisfaction. I wish there were more star ratings on Amazon for this product because it truly deserves it.

Initially, I was unsure about the issue I was dealing with. I thought it might be fleas from my pets, but after finding a bug around my bed (which turned out to be a tick), I realized it was something else. Upon removing the mattress covers, I discovered a baby silverfish, which was quite creepy. I live in a heavily wooded area with ponds and natural springs, so finding these pests was distressing.

To make matters worse, I noticed small black specks and soft white cocoons all over my house. They seemed to dig into fabrics when I tried to vacuum them, leading me to believe they were bedbugs. However, upon further investigation, I found them not only in my kitchen but also in various areas like drawers, furniture, and even inside my fridge. I even discovered them in my new RV, which I suspected was not properly sanitized by the previous owner.

Desperate for a solution, I tried using the Hot Shot Bedbug spray, which contains an insect growth regulator. While it provided some relief, it wasn't until I spoke to an employee at Ace Hardware, who is an avid camper himself, that I finally learned the truth. These pests are called pollen mites, and they are practically invisible unless you wipe the affected area with something white.

According to the employee, pollen mites are found in various places, including buildings, stores, and garages. They can easily attach themselves to clothes, shoes, and even pets. I was relieved to discover that I wasn't dealing with bedbugs, but I still had to take precautions. I continue to wash my clothes and bedding in hot water, running them through a hot dryer for at least 30 minutes every few days. I also store my clothes in totes or bags and ensure my husband doesn't bring in dirty clothes without bagging them first.

While I am starting to see the light at the end of the tunnel, I remain cautious. I will continue to bomb my house and RV every few months as recommended, and I'll treat the outside to minimize the chances of picking up more pollen mites. I want to emphasize that exterminators may not be able to detect these pests, so it's essential to spray with a product that specifically targets mites. I personally used Martin's I.G Regulator, which I added to Bug Blaster Indoor/Outdoor spray.

After reading several reviews, I decided to give this mattress cover a try despite the concerns about the installation process. I must say, I was pleasantly surprised by how easy it was to put on, even without a second person. However, I would advise being cautious and aware of your surroundings to prevent any accidents, as the mattress can be quite heavy and may cause damage if not handled properly.

One of the things I really appreciate about this product is the fact that it covers a disabled veteran's twin bed in an RV that is currently being remodeled. It provides a protective layer for the mattress, ensuring comfort and peace of mind.

In terms of quality, this cover is top-notch. Unlike previous ones I've tried, which were plasticky and made noise like a child's bed, this one is soft, comfortable, and quiet. The woven fabric is tightly constructed, and the additional seal at the closing zipper is a thoughtful addition. Considering the quality and the reasonable price, it's hard to find a better deal elsewhere.

Some users mentioned that the cover initially feels uncomfortable due to its plastic-like texture. However, they found that this feeling wears off over time or they simply got used to it. This discomfort is likely a result of the cover's bed bug prevention feature, which is an important aspect to consider for those concerned about such issues.

The overall quality of the cover is commendable, with the zipper working smoothly and the inclusion of velcro to ensure there are no openings where the zipper stops. This attention to detail adds to the product's reliability and effectiveness.

I recently had a bed bug infestation in my child's room after visiting parks in Orlando. It took me a while to figure out what was causing the marks on my daughter, but once I did, I became determined to get rid of these pests. I tried various methods, but only a few actually worked effectively.

Firstly, I want to warn you against using foggers. Despite using three of them in my daughter's small room, the bed bugs were still walking around afterwards. They are not effective in eliminating these pests.

I also tried using bug traps placed by the foot of each bed pedestal, but they didn't capture any bed bugs. Even when I filled her room with these traps, none of the bugs went into them. So, I wouldn't recommend relying on these traps either.

What did work for me was a combination of Diatomaceous Earth ("DE") powder with a puffer, Harris Bed Bug Killer spray (gallon size), and Harris Egg Bed Bug Killer foam. I purchased the Harris Bed Bug Kit from Home Depot, which contains some of these products. However, I needed extra foam cans, so make sure to order them ahead of time as they are not sold in stores.

I also invested in a handheld steamer from Walmart, priced at $49.00. I used this steamer to treat the wooden planks, mattress, and box spring. It's important to dismantle the entire bed, including screws, to reach all the hiding spots. During my first attempt, I only partially dismantled the bed and noticed more bed bugs the following night. However, when I fully dismantled the bed, I found most of the bugs and eggs in the wooden planks, crevices, and screws beneath the box spring. Using the foam inside these holes was particularly effective, as I witnessed the bugs running out and dying immediately. The foam is also capable of killing unhatched eggs, which I saw bursting when sprayed.

To prevent re-infestation, I used bed bug encasements purchased from Amazon to encase both the mattress and box spring. These encasements are effective in preventing the bugs from entering or escaping. Additionally, I sprayed the gallon-sized spray on furniture, luggage, and other potential hiding places.

It's important to note that you should repeat the entire process after 7-10 days to ensure any missed eggs that hatched are also eliminated. I did this and found no bed bugs or even dead ones during the second inspection.

While I was initially quoted around $1,000.00 for an exterminator to treat my daughter's room, I believe that the methods I used were more thorough and effective. By following these directions, you can guarantee a bed bug-free environment in your home. Good luck!

I recently encountered a bed bug infestation in my child's room after they brought them home from a park in Orlando. It took me a while to figure out the cause of the marks on my daughter's skin, as her dermatologist initially misdiagnosed them as allergies. After spending over 60 hours researching and working to eliminate the bed bugs, I consider myself somewhat of an expert on the subject.

I want to share my experience and provide some advice for anyone dealing with a similar situation. Firstly, I want to caution against using bed bug foggers. Despite using three different foggers in my child's small room, I found that they were ineffective. To my surprise, when I returned to the room, the bed bugs were still active and unaffected by the foggers.

Additionally, I do not recommend using bed bug traps at the foot of each bed pedestal. In my experience, these traps did not capture any bed bugs, even when the room was filled with them. So, it's best to avoid wasting your time and money on these ineffective traps.

What did work for me was a combination of products. I used Diatomaceous Earth ("DE") powder with a puffer, Harris Bed Bug Killer spray (in a gallon size), and Harris Egg Bed Bug Killer foam. I found that Home Depot sells the Harris Bed Bug Kit, which includes some of these products. I suggest starting with the kit and purchasing additional foam cans, as I ended up using four of them. It's worth noting that the foam cans are not available in-store, so ordering them ahead of time is essential.

In addition to these products, I also invested in a $49.00 hand steamer from Walmart. I used the steamer to treat wooden planks, the mattress, and the box spring. To ensure the bed bugs couldn't escape or re-infest, I purchased bed bug encasements from Amazon and encased both the mattress and box spring. These encasements proved to be highly effective in preventing the bugs from entering or exiting the mattress and box spring.

When cleaning the room, it's crucial to dismantle the entire bed, including screws. Initially, I only partially dismantled the bed, and my daughter still encountered bed bugs on the first night. However, when I fully disassembled the bed, including the feet and all screws, I discovered most of the bugs and eggs hidden in the wooden planks, crevices, and screws beneath the box spring. I noticed a significant number of unhatched eggs in the spaces between the feet and the wooden planks. When I sprayed the foam into these holes, I witnessed the bugs running out and dying immediately. The foam I used was the only product I found on the market that effectively kills unhatched eggs. It was remarkable to see the eggs burst when sprayed with the foam. For other surfaces like furniture and luggage, I used the gallon-sized spray.

To ensure that no newly hatched eggs were left behind, I recommend repeating the entire room cleaning process after 7-10 days. This will help eliminate any eggs that may have hatched after the initial cleaning.

While I was initially quoted around $1,000.00 for professional extermination, I believe that even an exterminator wouldn't have been as thorough as I was. By following these steps, I can confidently say that you will be able to eliminate bed bugs from your home. Good luck!

I have been using this mattress protector for almost a month now, and I must say that it has exceeded all my expectations. Initially, I was hesitant to buy it online without being able to feel the material, but my friend convinced me otherwise. I needed to replace my old mattress protector, which had become thin and no longer waterproof. This product not only surpassed the quality of my previous one but was also more affordable. I am so satisfied with it that I am considering ordering their pillow protectors as well.

The delivery was prompt, and the product arrived neatly packaged with no chemical smell. When it comes to functionality, this mattress protector does not disappoint. It is not plasticky or noisy, and it fits perfectly on my queen-size bed. Washing it is a breeze, as there was no shrinkage or melting. Overall, I have had no issues with this product.

I should note that this review is for the split queen 2pc mattress/box set for my queen-sized bed with a twin foundation box. I am very pleased with the final results, especially considering that my previous, more expensive cover did not fit as well. The zipper is easy to use, and there is no sagging. I highly recommend ordering this mattress protector without hesitation.

While it was a bit challenging to put it on initially, once I figured it out, it zipped on effortlessly. The peace of mind it provides is invaluable to me, knowing that spiders and other vermin won't come near me while I am sleeping. Additionally, it serves as a deterrent for my cats from scratching underneath and ruining my box springs. I have had it for about two weeks, and so far, my cats have shown no interest in damaging it.

As for using it on a hybrid trailer with bunk ends, the mattress pad had some extra room around the edges when we zipped the mattress into it. However, it became snug when we folded the mattress. Despite this, I am grateful to have a mattress pad that keeps the mattresses clean while we are out camping and the kids are playing in the dirt.

In terms of comfort, the fabric feels soft and nice against the skin. It is also great that you can't tell which side is up, allowing you to flip your mattress without any hassle. The only minor issue I encountered was a few loose threads that needed to be trimmed off, but it did not affect the overall performance of the product.

I recently purchased a mattress encasement for our cross-country move, and I must say, I am extremely impressed with its performance. Initially, my husband was skeptical about spending money on a high-quality encasement, but I knew that flimsy plastic protectors wouldn't provide adequate protection for our expensive mattress during the move. I was concerned about potential damage from water, bed bugs, and other pests that could infiltrate the moving truck.

Unfortunately, my worries became a reality when our mattress ended up sitting in a puddle of dirty water due to water leakage in the truck. However, to my relief, when we removed the encasement, there wasn't a single stain or mark on the mattress. I was amazed at how effectively the encasement prevented any damage. I want to express my gratitude to the manufacturer for creating such a reliable product.

Aside from the move, I also had to deal with a bed bug situation caused by my brother unknowingly bringing them into our home. To protect all our beds, I purchased enough encasements to cover each one, including our new king-size mattress. I read countless reviews before deciding on this particular brand, and I have found them to be of excellent quality. The encasements arrived in perfect condition, with no rips or stitching issues. The only minor flaw I noticed was a problem with the zipper on one of the pillowcases, but it's not significant enough to go through the hassle of returning it.

Installing the encasements was a breeze. The zipper design requires you to fully unzip it, slide it over one end of the mattress with the bunched side at the back, and smooth the encasement over the front. I was able to install the king-size mattress encasement and each half of the box springs by myself, although having someone to help lift the mattress is beneficial. I made sure to add extra padding when enclosing the box springs to prevent any sharp edges from causing damage. It's crucial to ensure there are no openings for effective bed bug protection.

Since using the encasements, I haven't experienced any more bed bug bites. I have taken additional precautions by spraying the bed frames with rubbing alcohol and thoroughly cleaning and inspecting the affected areas. I've also been washing and running all bedding through the dryer for at least 30 minutes each to eliminate any potential re-contamination. Bed bugs are a disgusting thought, but they can happen regardless of how clean your home is.

In terms of comfort, these encasements provide a similar feel to parachute pants. There is a slight sound when moving on the mattress, but it's not bothersome. I did notice that the encasements make it easier for sheet corners to slide off, which can be a minor inconvenience if you have a restless sleeper like my husband. The only peculiar thing I've noticed is that when I get out of bed, I can hear and see air going back into the encasement. I assume this is due to the air being pushed out by my body weight and then reinflating when I get up. As it's currently winter, I haven't noticed any extra heat, but once the bed bug scare is over, I plan to add my thick mattress protector covers on top of the encasements for added cushioning.

I recently purchased this bed liner, and while it does have some positive aspects, there are a few things that disappointed me. Firstly, the product claims to be waterproof, but I found that it is only resistant to water. While it prevents water from seeping onto the bed, if you spill something on it, you will need to scrub it clean like a cloth. This can be inconvenient, especially when dealing with messes made by children or accidents like vomit.

The description of the product should be clearer to avoid any misconceptions. On the positive side, the quality of the bed liner is excellent, and I have no reason to return it. I understand that part of the responsibility lies with me for not doing thorough research and ensuring that it was a latex liner instead of a cloth liner. The fabric is cloth, and it requires scrubbing to remove any dirt or stains. However, it does come off relatively well, as I had to clean up red dye vomit, and the stain came out without seeping through to the bed.

The liner seems to have a protective layer underneath the cloth, which prevents any liquids from reaching the bed. The cloth layer is added for comfort, although I find the concept a bit unusual to sleep directly on a liner. While it may not be a perfect concept, it is not entirely flawed either.

Update: I ended up purchasing another one of these bed liners for my own bed, and I have to say, it is not a bad product at all. However, if you want to avoid staining, it is important to know that you can turn the liner inside out. This simple adjustment changes everything. I'm not sure why they designed it with the cloth side on the outside, except for added comfort. The latex liner inside is soft, quiet, and just as comfortable, so I don't understand the need for the cloth on the outside. We have started flipping ours inside out, and it has been a game-changer.

Compared to other liners I have tried, this one is much better. It seems more durable, and even if it were to develop a hole, it would likely hold up better than the previous one I owned. I wouldn't intentionally test this theory, but it is definitely an improvement over a simple latex liner. I'm grateful that I discovered the inside-out trick, and I hope this information can be helpful to others. Overall, it is a good liner, and if you don't anticipate regular spills, it can be a perfect fit for your needs.