I Tested And Reviewed 10 Best Shallow Well Pump With Pressure Tank (2023)

I have been using the Merrill MFG FVNL100 1" No-Lead Brass Foot Valve for my watering and sprinkler systems, sourcing water from a lake with lily-pads and small debris. I have built a 45-gallon filter with this foot valve, and it has been working effectively for the past month. One suggestion I have is to install an "open" valve at the top of your water source to easily prime the pump without having to remove any screws. It can be time-consuming to fill up the loop using the screw method.

I have a 1" inlet from the foot valve, which is about 35 ft away from the pump. After stepping down the size to 3/4", I have another 200-250ft of piping. I am considering extending the 1" outlet for more zones in the future, as the current setup has proven to be successful. Before turning on the pump, it is crucial to prime it completely and remove all air to prevent any potential damage to the bearings, which could shorten the pump's lifespan.

To protect the pump from rain, I plan on constructing a small wooden structure that will allow for adequate airflow. The pump itself is not very loud, and the noise can only be heard from a distance of about 15-20 feet. If it is covered, the noise might not be noticeable at all. As of now, I am satisfied with the performance of this pump, and I will update if there are any changes. I am hopeful that it will continue to work well.

On a separate note, I purchased the Aquastrong 1.6 hp. pump to water my lawn from an adjacent river. Initially, it took some time to start up due to the 3-inch inlet hose. However, once the pump was running, I left it to operate a sprinkler for about 3 hours. Unfortunately, after turning off the pump and moving the sprinkler, I encountered difficulties in getting the pump to work again. It repeatedly blew the ground fault circuit it was connected to.

After some troubleshooting, I found a solution by purchasing a three-prong to two-prong adapter for 99 cents at Ace Hardware. With this adapter, the pump runs smoothly without blowing the ground fault circuit. I also plan to take preventive measures by disassembling the pump and applying WD-40 on the seal going to the motor for winter storage, as previous pumps have frozen up during the winter months.

I recently had the opportunity to try out the Bomgie pump and I must say, I am thoroughly impressed. Right from the moment I received the product, I was impressed with the packaging. It was top-notch and showed the attention to detail that Bomgie puts into their products.

The pump itself exceeded my expectations. I use it to collect rainwater and it works like a charm. With a capacity of up to 1,000 gallons per rainstorm, this pump has made my life so much easier. I attached a photo to show how I use it to pump water out of my rain barrels and up a steep hill into my vegetable garden.

Of course, the true test of any product is its longevity. But based on the quality of the packaging and the pump's performance so far, I have high hopes. I did a lot of research before purchasing the Bomgie pump and it had a rating of 4.8. Now I understand why. Thank you, Bomgie!

Unfortunately, the pump did not meet my specific needs and I wanted to return it. However, I had waited too long to use it and was beyond the return date. But here's where the seller truly impressed me. They read my review and responded within a few days, offering me a full refund despite the lapse in time. This level of consideration and customer service is rare, and I am extremely impressed. I will definitely consider buying more items from this seller in the future.

I also uploaded a video to showcase how well the Bomgie pump works for a rain barrel irrigation project. Even when pulling water from a 5-gallon bucket, the pump exhibited great pressure and flow control. The pressure bladder is particularly impressive, maintaining pressure even after the power is cut. There were some minor leaks in the video, but that was due to my own error in not tightening the fittings properly. The quality of the pump is top-notch, and the instructions provided are clear and helpful.

One thing to note is that the pump needs to be primed with about 3 quarts of water, but if you use a check valve, it can stay primed for weeks. However, after a full season of not using it, it may need to be re-primed. Overall, I wish I had started this project with the Bomgie pump five years ago. It has truly exceeded my expectations.

I recently purchased the FOTING Well Pump to assist with transferring water from a stream to my ½ acre garden. The user manual provided was informative and easy to follow, making the installation process hassle-free. To improve the priming process, I added a foot valve to the intact hose, which eliminated the need to prime it before each use. Additionally, I was able to run two sprinkler heads from the pump, and I must say, it proved to be incredibly efficient, powerful, and surprisingly quiet during operation.

The pump arrived a day earlier than expected, and the installation process was a breeze. Once installed, the pump ran quietly and provided excellent water pressure, exceeding my expectations. However, after a few months of use, the pump unfortunately stopped working. Thankfully, the customer service provided by the company was exceptional, as they promptly offered me a refund. I am extremely satisfied with their level of service.

Upon inspection, the pump appears to be solidly built, leading me to believe that I may have received a unit with a manufacturing defect. Despite this setback, the pump performed flawlessly until it stopped working last week.

Although I was initially hoping for an input and output size of at least one and a half inches, the one-inch size did not limit the flow rate or the pressure delivered by the pump. It consistently delivered the promised flow rate and pressure, which I found to be quite impressive.

Furthermore, I was pleasantly surprised when the company reached out to me to replace the defective pump. Their proactive approach and willingness to rectify the situation left a lasting impression on me, and I am truly grateful for their exceptional customer service.

I recently purchased this pump for my pole barn, and I must say, it has exceeded my expectations. I live on an old farm with a well that doesn't have enough pressure to reach the barn. However, this pump solved all my water problems. I installed a separate line from the well to the pole barn, and now I have enough pressure to run a hot water tank and even a bathroom. It has made my time in the pole barn so much more convenient, and I no longer have to leave the barn for basic amenities.

The installation process was straightforward. I simply followed the instructions to prime the pump, and it worked flawlessly. The included threaded adapter made it easy to connect the necessary fittings for my specific application. Although the instructions suggest priming the piping individually, I found it more practical to install all the piping and backfill it with water using a garden hose. Once I turned on the pump, it started working almost immediately.

During a test run, I used this pump to evacuate the water from my 27' pool, which holds around 17,000 gallons. Despite the initial low water flow, a quick cleaning of the filter cap resolved the issue, and the pump ran smoothly for about 14 hours, moving approximately 8,000 gallons of water. It effectively cleared out sediment, algae, and leaves from the bottom of the pool, proving its efficiency and reliability.

One recommendation I have is to install a larger sediment filter to prevent the small built-in filter from getting clogged. This will ensure uninterrupted pumping and prolong the lifespan of the pump.

I recently set up the connection myself and found it to be quite straightforward. There are plenty of helpful videos on YouTube that guide you through the process. Once properly installed, the connection has been working flawlessly for me.

One important tip I would recommend is to use high-quality Teflon tape to prevent any potential leaks. This ensures a tight and secure connection, giving you peace of mind.

In terms of performance, I've only had the connection running for a short period of time, but so far, I am pleased with the minimal noise it produces. It is important to note that the noise level may vary depending on your specific setup and usage.

I will give it a rating of 4 stars for now, as I haven't had the chance to run it for an extended period, but based on my initial experience, it is promising.

Additionally, it's worth mentioning that if your application does not require suction, you may need to consider adding a check valve. This will prevent any backflow and ensure the connection functions as intended.

I am extremely pleased with the G Green Expert pump and the benefits it has brought to my water supply. Living in an area where the local municipal water company delivers recycled and potentially harmful water, I was determined to find a safer alternative. Luckily, I discovered a 45-year-old well on my property, filled with fresh and natural well water. The proximity of my property to the water table, being less than 20 feet away, has made this pump an absolute miracle for me.

Having lived in a state where fluoride is not added to the water supply, I have become very particular about the water I consume. After reading the safety and testing report on my local water, I refused to ingest the contaminated water provided by the municipality. For the past two years, I have been buying distilled water, which although less toxic, lacks the energy and vitality found in natural water sources. This is where the G Green Expert pump comes in, providing me with all-natural water straight from my own well. I am incredibly grateful to G Green Expert for this innovative solution.

The setup process for this pump is remarkably easy. Simply open the box, take out the pump, and connect it to the necessary hoses and adapters depending on your specific setup. Whether your water source is a lake, stream, well, or even a flooded basement or swimming pool, this pump is versatile and ready to go. It is worth noting that you will need to purchase hoses and may want to invest in a stop valve or check valve for added convenience. The instructions provided are mainly pictorial, which may be slightly challenging to follow for some. However, the overall design and structure of the pump are impressive, ensuring durability and resistance to wear and tear.

With the pump and tank combination, I now have the luxury of pressurized well water in my plumbing system. Additionally, the tank provides emergency backup water, eliminating the need for the pump to kick on every time I turn on a faucet. This convenience has been invaluable, especially considering that my well had not been used for over 20 years. It's a reminder that even if you are on city water, it's worth checking to see if you have an old well on your property that can provide a reliable and long-lasting water source.

I recently purchased the Red Lion well pump after having a disappointing experience with a different pump for my front and backyard irrigation system. I must say, the Red Lion pump has exceeded my expectations. It is not only quiet, but also constructed with high-quality materials such as real iron, unlike the cheap plastic used in some other pumps.

One of the main reasons I am writing this review is to let others know about the exceptional performance of this pump. I use it for my entire house, drawing water from a 5000-gallon rainwater harvest system. The pump has performed flawlessly, providing great water pressure and allowing me to use multiple water outlets simultaneously without any flow problems. It consistently maintains a pressure of 40-45 psi, which is impressive.

I would like to mention that it is important to install a back-flow valve to hold the prime of the pump. Also, be careful not to over tighten the water intake connection, as it can cause the metal to split. Follow the directions provided and use thread seal tape liberally to ensure a leak-free connection.

When we purchased our house, we discovered a private well for garden irrigation that the previous owners had neglected to mention. The old 3/4 hp pump was in bad shape and needed replacement. I accidentally ordered the Red Lion 1/2 hp pump instead of a 3/4 hp pump, which made me concerned about water pressure. However, to my surprise, this pump, along with the pressure tank, has proven to be more than capable of drawing water from the shallow well and pushing it up a slope and through 150 feet of garden hose with plenty of pressure to spare. This allows us to efficiently water all our garden areas.

One of the standout features of this pump is its quiet operation. Despite its powerful performance, it works silently, which is a great benefit. Additionally, it is energy-efficient and perfect for off-grid homesteads like ours. We have solar panels with battery backup, and this pump consumes minimal power while providing consistent water pressure. We have experienced no fluctuations in water pressure, even when using water both inside and outside the house simultaneously.

I recently had the task of pressure washing a large road surface in preparation for seal coating, and I needed a pump that could provide the necessary pressure to my pressure washer. After some research, I came across this shallow well pump and decided to give it a try.

First of all, the pump worked perfectly for my needs. I was able to pump over 2,500 gallons of water without any issues. The pressure was consistently at the required 20 PSI or higher, allowing me to effectively clean the road surface.

I did encounter a small problem with the fan cover being damaged during shipping, but it did not affect the operation of the pump. I immediately contacted the manufacturer and they assured me that they would replace the unit if there were any further issues caused by shipping.

Now that the road is cleaned and sealed, I plan to repurpose this pump for a rainwater distribution system. Its performance has been excellent so far, and I have no doubt that it will continue to work well in this new application.

I recently replaced my old worn-out pump with this new pump and I have been more than satisfied with its performance. It has significantly boosted our water pressure from 18psi to over 80psi, although I personally do not prefer to run it at such a high pressure. To address this, I plan on adding an external pressure switch.

Initially, I found that some of the fittings on the pump were a little loose. However, after ensuring that everything was properly tightened and airtight, the pump has been working great. I am able to run two sprinklers simultaneously without any issues, and I have even used it for several hours at a time without encountering any problems. Additionally, I have connected a drip irrigation system to the pump and it has been working flawlessly. I am very pleased with its performance and overall functionality.

While I am happy with the product itself, I did encounter one minor issue. I had to go online to find the wire-ring color diagram, as it was not included in the written material provided with the pump. It would be beneficial if this information could be included in the package for future customers.

Furthermore, I would like to commend the customer service representative of the company. Almost a year after purchasing and installing the pump, I experienced a slight problem. However, the representative promptly responded to my concern within the hour, which impressed me. The company is currently addressing the issue and I am extremely satisfied with their level of support and willingness to resolve the problem.

I recently purchased this pump and I have been extremely satisfied with its performance. The directions provided were clear and easy to follow, allowing for a smooth and hassle-free installation. It is worth noting that in order to maximize the pump's efficiency, it is necessary to purchase a filter with a check valve for the intake line.

After two months of continuous use, I can confidently say that this pump has exceeded my expectations. It has been running flawlessly for 6-7 hours per day, primarily to water my grass during the month of August. Additionally, I have also utilized it to wash down my boat dock when it gets covered in Mayflies. The pump has never failed during these tasks, further solidifying its reliability.

One of the best aspects of this pump is its convenience. I regret not purchasing it earlier, as it has proven to be an invaluable tool. In comparison to my previous Grundfos pump, which was discontinued and had no available parts for repair, this pump has been a game-changer. Instead of spending a substantial amount on a new model from Grundfos, I opted for this American-built pump and pressure tank combo. I have been nothing but satisfied since then. The materials used in its construction are of high quality, guaranteeing its longevity.

The pump operates quietly and smoothly, which is a huge plus. With the addition of the pressure tank, it effectively prevents pressure drops or surges, ensuring a consistent water flow. It has provided great water pressure when used with my fifteen hundred gallon water tank for watering my covered horse arena, making it an excellent choice for any similar applications.

I am also impressed by the power of this pump. It is not only quiet but also incredibly powerful, making it a perfect fit for my garden well. I highly recommend it to anyone in need of a reliable and efficient pump for various water-related tasks.

Lastly, I would like to mention that this pump has been working flawlessly for a month alongside my 200 gallon water tank. I have full confidence that it will continue to perform reliably in the future.