I Tested And Reviewed 10 Best Tub And Tile Refinishing Kit (2023)

I recently had the opportunity to try out a product for cleaning and rejuvenating my tub, and I must say, I am thoroughly impressed. My tub had become discolored and dirty over time, and despite trying numerous cleaning products, I couldn't get it to look clean. I was even considering replacing the tub altogether. However, I'm glad I decided to give this product a try.

The application process was incredibly easy. There was no need for mixing or measuring; all I had to do was spray and paint. It saved me a lot of time and hassle. However, I do want to mention that the fumes from the product were quite strong, so I would highly recommend ventilating the area and wearing a face mask for protection. I unfortunately suffered from a headache later on due to inhaling the fumes, but that was my own fault for not taking proper precautions.

The results, on the other hand, were outstanding. My tub now looks brand new, as if it had just been installed. I couldn't be happier with how it turned out. I will admit that it didn't come out as bright white as I had expected, but rather a warmer white. Nonetheless, it still looks great and has transformed the appearance of my bathroom.

As for the application on tiles, I decided to test it out on my son's bathroom that had old, pink trim tiles. Initially, I used Kilz primer on a portion of the tiles to see if it would help with coverage. While the primer did help, I discovered that it wasn't necessary. The spray paint worked perfectly fine on its own. It provided a smooth and shiny finish without the need for a primer.

The consistency of the spray paint is similar to that of regular spray paint, and I did experience some minor leakage under the tape along the grout line. However, it was easily remedied with some careful sanding after the paint had dried. The paint came right off with sandpaper, but it held up well when I scratched it with my nails.

I must warn you though, the smell of the product is quite strong. It's important to find a way to ventilate the area and consider wearing a painter's mask if the smell bothers you. I found that taking breaks, running the bathroom vent fan, and using a standing fan to keep the air moving helped mitigate the odor.

It took two coats of spray paint to completely cover the pink tiles, but the end result was perfect. The tiles now look fresh and updated, and I couldn't be happier with how they turned out. I will definitely be posting before and after pictures on my YouTube page to showcase the transformation.

I recently purchased this product for my daughter who frequently dyes her hair. I must say, I am extremely pleased with the results. The product was easy to use and the outcome was amazing. It provided a refreshing touch without breaking the bank. The cost of the makeover was around $40, and we still had over half the product left after three coats. I highly recommend this product for anyone looking for an affordable and effective solution.

I decided to try this product to give my outdated 80s blue bathroom a fresh look. Instead of buying a new vanity, I thought repainting the existing one would be a more cost-effective and environmentally friendly option. I was pleasantly surprised with the tools that came with the product, all of which worked well during the process. The paint went on smoothly, even on the slippery ceramic sink. The drying time was longer than expected, so I would suggest waiting 24 hours before applying the second coat. Overall, I am extremely happy with the end result. The $40 investment was definitely worth it, especially considering the hundreds of dollars I saved by not buying a new vanity.

I am delighted with the tub and tile painting kit by DWIL. The kit is well-made and arrived flawlessly. It includes everything you need for touching up or repairing patches on your tub or bathroom tile. I originally purchased this kit for my art work, specifically painting ancient symbols on rocks, and it works incredibly well for that purpose compared to standard paints. I am very, very, very satisfied with this item. Thank you!

I recently bought this kit to update my entire bathroom, including an old sink and bathtub. Both were originally beige, but I wanted everything to be white. The paint coats well and the kit is well-thought-out, providing all the necessary tools. I haven't encountered any issues or found anything lacking so far. I will update this review once I have completed my project.

I purchased these paints with the intention of sprucing up my second bathroom. While they do work, I have noticed that my roommate, who takes vigorous showers, has already managed to scratch the paint, exposing the original plastic or tile. I would not recommend this product if you have kids, roommates, or individuals who are rough during showers or baths. Perhaps applying multiple coats and using resin epoxy could provide better durability in such cases. However, if you are someone who is more gentle and takes care of things, I would highly recommend this product as it can truly make a difference in your atmosphere.

I recently used this bathtub restoration product and I must say, the outcome exceeded my expectations. The product worked exceptionally well and the end result was truly great. I would highly recommend it to anyone looking to revitalize their bathtub.

Before beginning the restoration process, I took a few additional steps that I believe made a significant difference. Firstly, considering I was working in Ohio during January, I made sure to heat the room to 76-degrees for a day prior to installation and kept it heated during and after the installation. Additionally, I allowed the product to warm up in the room for a day before starting the installation. This step seemed to help the product flow smoothly when poured.

My bathtub was in a terrible condition, but I took thorough measures to prepare it for restoration. I used an acid wash with the Lysol power cleaner, allowing it to dry before scraping off any loose material with a razor blade. I also power-sanded areas that required smoothing and performed another acid wash. To ensure everything was completely dry, I used a hair-dryer and even utilized compressed air to remove old caulking from edges and corners. However, I only stripped the tub down to the base where necessary. If the previous coating was in good condition, I left it untouched.

To protect against any potential drips, I covered all plumbing fixtures with plastic bags. This precaution proved to be worthwhile as even unexpected components, such as the hot and cold handles, ended up dripping overnight. Taking a few extra minutes to wrap all plumbing components in bags is definitely recommended.

When it came to pouring the product, I chose not to use the entire container. I followed the advice from instructional videos and poured about 2/3 of the product instead. This allowed me to have less excess product to remove later in the process.

I was initially apprehensive about pouring the product on the front of the tub, fearing it may damage my marble tile floor. Instead, I opted to roll the front section generously with the product, and it worked perfectly fine.

In order to reach tight corners and difficult spaces, where the roller was too large, I utilized a clean putty knife and a small artist brush. This method worked effectively and ensured an even application of the product. I would highly recommend having these tools on hand during installation.

For taping off areas, I used Frog Tape, a higher-end painters tape, and found it to be highly effective. Removing the tape the next day was a breeze, but it's important to take your time and use a razor blade if needed to coax the tape off gently.

I taped off the drain but left the tape on until the next day when the product had fully hardened. I was concerned that removing the tape while the product was drying might disturb the process or cause the drain to fill up with the product. Taking it off the next day required some patience, but it turned out to be a success. I used a box cutter to carefully cut around the drain and remove the tape. It's crucial to be cautious and avoid accidentally cutting the bottom of the tub.

Based on the outcome of my restoration, I am confident that this product will last for years. If any issues arise in the future, I will certainly update my review.

I decided to purchase this product based on its positive reviews and the fact that I could receive it quickly. However, I encountered some challenges during the application process. The instructions provided were difficult to understand due to broken English, which made it unclear how to properly prepare the surface. Nonetheless, using common sense, I cleaned and sanded the tub before applying the paint.

The paint itself appeared to be of good quality, with a nice thickness that indicated it would provide good coverage. I used both the foam roller and brush that came with the product. While the brush was decent, I noticed that the paint was too thin and left visible brush marks on the tub. To achieve a smoother finish, I had to go over it with the foam roller.

The main issue I faced with the roller was that it tended to drip and create lines on the tub, which became more noticeable as they dried. Attempting to fix these lines often resulted in streaks or even stains on the tub. It took three coats to achieve a satisfactory result, but I must admit that I made some mistakes along the way, leading to an overall subpar outcome.

If I were to use this product again, I would consider purchasing a different paint roller to avoid the issues with dripping. Unfortunately, my experience with this product was disappointing, and I would not recommend purchasing it. In fact, I might have to hire someone to fix the tub now.

It's important to note that I have experience with painting, so the challenges I faced were not due to user error. The shortcomings lie in the paint itself and the included application tools, specifically the roller's tendency to drip and create streaks in the corners.

Update: After applying a third coat, the tub is starting to look much better. However, it is crucial to closely monitor any streaks and drips during the application process to achieve a satisfactory result.

I recently used the Tub and Tile resurfacing kits by RustOleum for my bathroom remodel, and I have to say, I am extremely happy with the results. Here are some lessons I learned during the process:

1. Roller Choice: I would recommend not buying the foam-style roller that Amazon recommends. Instead, opt for a roller with a harder plastic and a white felty-like part. I made the mistake of using the foam roller and it completely disintegrated. The harder plastic roller may be a bit trickier to use in curvy areas, so I would suggest using a paint brush for those parts.

2. Timing of Coats: It is important to follow the instructions and not let the product sit for longer than 30 minutes to 1 hour between the first and second coats. I made the mistake of letting one coat sit overnight and then applying the second coat the next day. The areas where I applied the second coat within the recommended time range turned out much better. The areas where I waited longer had a slightly crackly or hammered look. So, it's best to stick to the recommended timing.

3. Ventilation is Key: The product has a strong odor, so it's crucial to use it in a well-ventilated area. I highly recommend having a fan and opening windows to ensure proper ventilation. Just be careful to position the fan in a way that blows air outward, as blowing it inward may cause dust particles to stick to your freshly painted surfaces.

4. Allow Sufficient Drying Time: If possible, try to let the painted surfaces sit longer than the recommended 3 days before exposing them to any hair dye or products with dyes. The paint tends to absorb color even after 3 days, although it becomes less sensitive over time. So, it's better to be safe and avoid any potential staining.

5. Prepare for a Transformation: Be prepared for a stunning transformation in your bathroom. I went from a strange pink/brown bathroom to a beautiful white one, and I was amazed at how much dirt was hiding behind those colors. You might find yourself needing to clean the bathroom more frequently to keep it looking fresh.

6. Versatile Application: This product works amazingly well on wall tiles too. It could be a great solution for budget-friendly kitchen backsplash remodels as well.

7. Invest in a New Paint Brush: I would recommend splurging on a new paint brush specifically for this project. Avoid using a paint brush that has previously been used and may have residues in it. Cleaning the brush after using this product is not enjoyable, so it's better to just dispose of it afterward.

I recently tried out this product for my bathroom remodeling project and overall, I am quite satisfied. However, there were a few aspects that could have been improved.

Firstly, I have to mention the application recommendation provided by the product. The recommendation of using a brush for shower tile was not ideal. I found that the brush application resulted in a runny and sticky paint consistency, which caused the bristles to be pulled out frequently. As a result, I switched to using a roller halfway through the process, and the results were noticeably better. The side where I used the roller had no runs, unlike the side where I used the brush. It would have been helpful if the instructions mentioned the option of using a roller for a smoother application.

The smell of the paint is quite strong, which is to be expected since it's epoxy-based. It has a similar scent to strong nail polish remover. To tackle the odor, I used a window fan to create a negative pressure in the room and placed plastic around the bathroom door to prevent the smell from leaking outside. Additionally, I invested in a respirator (not just a mask) which effectively eliminated any unpleasant smell while I was working.

Although the paint is thin and watery, unlike what I anticipated, I followed the instructions step by step. I made sure to tape off everything I didn't want to paint and used a non-shedding nap roller, which made the process much easier than using a brush. However, I must mention the toxic fumes emitted during the application were quite overpowering. Even with a face mask, I felt discomfort and a sensation that my nose was going to start bleeding. It is important to take proper precautions when working with this product to ensure your safety.

In terms of the end result, I am pleased with how my bathroom turned out. I had to apply three coats of paint due to the variation in color between my brownish and dark blue tiles. Although the instructions advised against applying the third coat immediately after the second, I decided to take the risk to save time. Fortunately, it didn't negatively impact the final outcome. The transformation of my bathroom is remarkable, and I am genuinely satisfied with the results.

However, I am curious to see how long the paint will last, if it will stain easily, and if there will be any chipping in the future. Only time will tell, and I hope that the durability of the paint lives up to my expectations.

I recently used Bathworks to refinish an old porcelain tub and I must say, I am extremely satisfied with the results. After researching various refinishing products, I found that Bathworks met all my criteria and exceeded my expectations.

One of my main concerns was the application process, and after considering options like spraying, pouring, brushing, and rolling, I found that rolling with a foam roller worked best for me. I had no issues with the odor or any other problems associated with the application.

Before applying the Bathworks coating, I spent three days thoroughly cleaning the tub and used the recommended EZ Etch for preparation. I must emphasize that the EZ Etch is an absolute must. It was strongly recommended by a person at Sherwin Williams, and I can confirm that it is great stuff. Cleaning is a crucial part of the process, and I've even developed ceramic paints myself, so I understand the importance of a good cleaner and primer for proper adherence.

Once the tub was perfectly clean, the application of the Bathworks coating was simple. I followed the instructions and rolled it on as their video suggests. It's important not to rush and to take your time to ensure proper coverage. I found that using just enough paint on the roller, without overdoing it, worked best. Also, avoid dry rolling. For the second coat, be careful not to apply too much paint, especially on the straight sides, as this can lead to runs. Since the paint is self-leveling, adding too much paint can result in runs. If you do encounter any runs or fisheye, it's important to address them immediately without adding more paint to the roller.

I did develop a few runs myself, but I decided to leave them alone and let the self-leveling properties of the paint do their work. After a few days, the runs were nearly gone and barely noticeable. I then allowed the paint to cure for 30 days without use. The end result was a rock-hard, glossy finish that looks first class. The paint adhered well and I am extremely pleased with the outcome.

In fact, I am so satisfied with Bathworks that I have decided to use it to refinish another tub. Having gained a better understanding of the application process, I am confident that I can avoid any runs this time. While the process can be time-consuming, it is not difficult, and the end result is definitely worth it.

The only suggestion I have for the Bathworks team is to consider adding a troubleshooting section to their instructional video, specifically addressing how to deal with runs. This would have been incredibly helpful for me during my first application.

I recently used this epoxy paint to cover up wear and rust around the drain in my 50-year-old bathtub. The application process was fairly straightforward. Before applying the epoxy, I made sure to remove as much rust as possible using sandpaper and steel wool. The mixing of the A and B components was easy, but it's important to follow the directions carefully. The entire contents of the A bottle should be poured into the B bottle, and a second coat can be added after 10 minutes.

I found that the product provided good coverage and improved the appearance of the affected areas. While it didn't make my tub look brand new, it certainly made a noticeable difference and was a cost-effective alternative to hiring a professional for respraying. The application was also quite easy, and I appreciated the inclusion of a brush applicator in the lid of the B bottle.

One thing to note is that it's important to thoroughly clean and sand any rusted areas before applying the epoxy. I missed a spot and now the rust is showing through the white paint, so I'll need to remove the paint and address the rust issue before reapplying.

I had been wanting to update the outdated almond-colored fiberglass bathtub/shower combo fixtures in my newly purchased home for a while. After exploring various options, I came across Magic Tub & Tile refinishing kit. The cost of replacing the fixtures with the help of contractors was quite steep, so I decided to give this kit a try.

The prep work for each tub/shower took some time, but it was worth it. The kit is designed to cover around 75-100 square feet with two coats, so I purchased two kits for my fixtures. It would have been helpful if the product page included a list of additional supplies needed, as I had to gather them separately.

One important tip from a review was to wait longer after mixing the activator with the base paint. I followed this advice, and it helped to reduce the runniness of the mixture, which resulted in fewer drips during application. Keeping a clean rag and lacquer thinner nearby was also handy for spills and clean-up.

During the process, I ran out of product while applying the second coat to the second fixture. Thankfully, I was able to order another can quickly and finish the job. It's important to note that this product cures within 72 hours, so time is of the essence. I ended up using a third kit for some touch-ups and achieved great coverage overall.

The finished result is impressive. The tubs now have a bright and shiny white appearance, which greatly enhances the overall look of my bathrooms. I am truly satisfied with the outcome.

Considering the cost, I spent approximately $175 on three kits and the necessary supplies, which is a significant saving compared to the thousands of dollars I would have spent on replacing the fixtures.

As for the leftover product, I am unsure about its shelf life. I plan to keep it sealed in the freezer until I need it again.

I recently used this product to refinish my old porcelain sink and bathroom tiles, and overall, I am quite satisfied with the results. However, it is important to note that the preparation process can be labor-intensive and time-consuming.

As a first-time DIY'er, I was initially skeptical about tackling this repair myself, as I usually prefer to hire professionals. However, I followed the instructions carefully and was able to achieve a brand new look for my sink. The key is to take your time and ensure that you have a very bright light to inspect the reflection as you spray.

One important tip is to spray over any matte finish areas until they become glossy, but be careful not to apply too much product that it sags. If sagging does occur, it can be easily fixed by using a 1-inch paintbrush to wipe it off and then waiting for 15 minutes before spraying another coat.

When it comes to refinishing bathroom tiles, I found that dedicating a full three days to the project and having a second person to assist with timing was crucial, especially if there is a large area to cover. I tried both the spray-on and brush-on methods, and personally, I preferred the brush-on option as it allows for more forgiving timing. It is important to follow the suggested drying time between coats to ensure the best results.

I contacted the customer service office twice during my project, but unfortunately, only received a response once. Therefore, it is worth noting that their customer support may not be consistently responsive.

For both the sink and tiles, I found that applying thin, even coats yielded better results compared to thick coats that tend to drip. It is also important to thoroughly clean and dry the surfaces before applying the product to avoid any weird spotting or imperfections.

Lastly, it is crucial to cover everything in the surrounding area, as the spray tends to get everywhere. I found that one can of the product was sufficient to cover a full wall.