I Tested And Reviewed 9 Best Whole House Water Filter For Well Water (2023)

I am extremely satisfied with this water filter as it fits perfectly into my water system. I have been using it for the past 6 months and it has performed exceptionally well. The fact that I replace it every 6 months gives me peace of mind, knowing that it effectively does its job.

I primarily use this filter between my well and house system. Although my well water is already clean, having this filter in place provides an extra layer of protection, ensuring that any impurities are removed before the water enters my house system. It's a comforting thought to know that my water is thoroughly filtered before consumption.

The delivery was prompt and the product arrived in excellent condition. I used it to filter water from a well, and so far, it has been working flawlessly. The filter effectively removes any potential contaminants, ensuring that the water I use is clean and safe.

The only downside I found was that the package was missing the little ring to hold the rubber washers in place. This made the installation a bit awkward, but once I managed to install it correctly, the filter worked perfectly fine.

I have been using Membrane Solutions' 20-micron string wound filters for my friend's house on a pond water system and I must say, they have exceeded my expectations. Not only are they more affordable compared to other filters on the market, but they also perform just as well, if not better.

The smaller perforations in these filters have proven to be highly effective in catching dirt and other impurities in the water. After three weeks of household use, the attached photo clearly shows how much dirt and "ick" these filters were able to capture. It's truly impressive.

I have also used these filters for my municipal water source, changing them every three months, and they have consistently delivered outstanding results. The color of the filter after use indicates just how well it has done its job.

One of the things I appreciate about Membrane Solutions' filters is that they work just as effectively as the ones I used to buy from a water filter company, but at a significantly lower cost. This makes them a great option for anyone looking for quality filters without breaking the bank.

I have been a loyal customer of this brand for three years now, and I have never been disappointed. However, it is worth noting that if you have silty water, you may need to change the filters more frequently. But overall, they work great and provide excellent value for the cost.

I recently purchased a filter to use with my well water, and so far, it has been doing a great job. I have not noticed any smells or color issues since using it.

Previously, I had to replace my well water pressure tank due to corrosion caused by slightly acidic well water. When I tried to drain the tank, I realized that the tank tee was completely clogged up, preventing any water from being drained. This incident helped me identify the source of my water pressure problems. The tank was also extremely heavy and difficult to move. To address this issue, I decided to install a filter on the pipes before the tank to catch sand and sediment.

I also had problems with my water softener head getting clogged up. To tackle this issue, I opted for a 5 micron filter to catch even the smallest particles. I am very glad I made this choice, as after the first month of use, the filter was already filled with sediment.

This filter has been particularly effective in dealing with high iron levels in my well water. I only need to replace it every three months, and there has been no loss of water pressure during this time. It might even be possible to extend the usage to four months.

The installation process was hassle-free as the filter fit perfectly into my Culligan whole house water filter system. I have no complaints about its performance or compatibility.

In the past, I have tried other filters that clogged up quickly. However, this particular filter has proven to be long-lasting, lasting about three months before needing replacement. This is especially beneficial for me as I have to deal with sediment and iron deposits in my well water. While it would be ideal to have the well lifted to address these issues, the combination of this filter and the water softener has made the situation more manageable for now.

After six months of using the filter, I would like to provide an updated review of its performance. This filter has proven to be a time and money-saving solution for our washer. It effectively addresses the issue of repeated filling and discharging, preventing unnecessary wear on the machine. Additionally, it has successfully resolved the problem of clogged input lines caused by fine sand particles in our well-water.

Reliable and Sturdy Construction:

The filter is constructed from durable brass, ensuring its longevity and resilience. Its sturdy build instills confidence in its ability to effectively filter out impurities and maintain optimal washer performance.

Versatile Installation Options:

The package includes various installation options, catering to different needs. In my case, I primarily used the filter for my washer and made use of the included reducers. These reducers, along with the high-quality bushing/washer, facilitated easy connection of the filter to the washer hose. This versatility makes the filter suitable for different applications.

Convenient and Complete Package:

The filter comes with teflon tape, which in my experience, is of superior quality compared to other brands I have used in the past. The inclusion of a bottom shut-off valve allows for easy sediment draining, minimizing maintenance efforts. Furthermore, the filter package includes a quick connect adapter and tubing for hassle-free drainage into a bucket. This thoughtful addition adds to the overall convenience and functionality of the filter.

Impressive Performance:

I cannot praise this filter enough for its outstanding performance. It effectively filters out sand and other impurities, ensuring a smooth functioning of the washer. The monthly cleaning process is simple and straightforward, requiring only the turning of a petcock valve while holding a cup underneath to dispose of the accumulated sand and water. This filter eliminates the need for frequent replacement of washing machines and significantly reduces wear on the washer pump.

Final Verdict:

Based on my experience and my wife's satisfaction with this filter, I can confidently say that it is worth every penny. The filter's sturdy construction, versatile installation options, and complete package make it a valuable addition to any household. Its reliable performance and convenience in maintaining washer efficiency make it a lifesaver, especially for those living in sandy areas or relying on well-water. I highly recommend this filter to anyone seeking an effective and long-lasting solution for their washer.

I am extremely satisfied with the performance of the Membrane Solutions 20 Micron filter. As a well owner dealing with iron contamination and sediment, this filter has proven to be a reliable solution. I have incorporated it as the initial step in my three-filter system, and it effectively handles the brunt of the incoming sediment and iron from my well.

One notable feature of the Membrane Solutions 20 Micron filter is its ability to be flushed, rinsed, and reused. I find this to be a cost-effective and convenient option, as I can easily maintain its efficiency by performing this process every 3 to 4 weeks. The results have been consistently great, allowing me to enjoy clear and clean water.

In conjunction with the 20 Micron filter, I also utilize a 5 micron filter sold by Kinetico as the second step in my filtration setup. The effectiveness of the 20 Micron filter significantly prolongs the lifespan and enhances the efficiency of the 5 micron filter in removing smaller particles. Completing the three-step system is a cartridge tank filter, capable of eliminating particles down to a remarkable 0.2 microns. Although this filter comes at a higher cost, it can also be flushed and rinsed, maintaining its performance for an extended period.

After experiencing the positive results from my initial purchase, I promptly reordered the Membrane Solutions filter, purchasing a quantity of four. I can confidently vouch for their effectiveness, especially for well owners seeking to filter out sediment and iron. I wholeheartedly recommend them without any reservations.

It is worth mentioning that the Membrane Solutions filter does not fit the AO Smith AO-WH-PREL filter housing. However, the vendor promptly provided a full refund, even though it was not their fault. Their excellent customer service and willingness to rectify the situation are commendable.

Additionally, I recently installed one of these filters in my whole house filtration system and noticed a significant improvement in water flow compared to the Culligan brand. Moreover, there was no detectable change in the taste of the water, unlike another highly rated brand I previously tried. The latter required extensive flushing before the taste normalized. As a result, I plan to stock up on the Membrane Solutions filters and continue using them in the future.

Furthermore, I appreciate the fact that these filters are effective in preventing sediment from entering my system. Although I have to change them approximately every 10-12 days, I now realize that this is a testament to their exceptional sediment-blocking capabilities. Considering their performance and the reasonable price, I find this to be a minor inconvenience.

If you're in need of a whole house water filter, look no further! This filter system is a great buy for the money. While the installation may not be the easiest, it's not overly difficult either. It took me about 7 hours to complete the installation, including a trip to the hardware store. However, with some careful attention, it could have been done much faster.

Now, let's address the downsides first. I encountered two leaks during the installation – one from a fitting and one from the o-ring seal. However, both of these leaks were due to my own error and were easily fixed. Additionally, it's worth noting that the bracket comes with screws to mount onto the filter housing, but not to mount the bracket to a wall. So, be prepared to have your own screws for that part of the installation.

On the positive side, I absolutely love this filter system. It's not overly difficult to install, and I even included a bypass so that I can change the filters without shutting off the water supply to the entire house. The housing unit is compatible with any filter that is 10×4.5", giving you the flexibility to choose the filter that suits your specific needs. I highly recommend getting a spare filter in advance, so you have one ready when it's time for a replacement.

One thing to note is that there is no indicator to let you know when it's time to change the filter. Personally, I like this because it eliminates the need for batteries or electricity. Instead, you can estimate the time based on your water usage and the filter capacity. I found it helpful to refer to last year's water bill as a reference.

In terms of durability, these filter housings are very sturdy. I expect them to last for years of use. I actually used them on our well to create a 3-stage filtration system with a UV filter as the final stage. As an added enhancement, I was able to drill and tap a 1/4" fitting to add a pressure gauge to the filter housings. This helps me monitor when it's time to change the filters more accurately. I drilled the hole right where the arrows were on the outlet end of the filter. Keep in mind that pressure gauges can only be used to determine if a filter needs to be changed when the water is flowing. Once all taps are closed, the pressure in the system equalizes.

The brackets for the filter housings are easy to assemble. However, I do wish that the holes in the upper filter housings were threaded. It was a bit tiring to assemble three filters in one go.

I recently purchased the AQUACREST FXHTC carbon filter to replace my more expensive GE FXHTC filter, and I must say that it was a perfect fit. The filter comes with high-quality silicon gaskets at the top and bottom, ensuring a secure fit and preventing any leaks.

Although I have only had the filter installed for 5 days, I have already noticed a significant improvement in the quality of my water. The filter has effectively removed dirt and rust, resulting in cleaner toilets and tubs. Additionally, the water now tastes better when brushing our teeth.

One of the best features of this filter is that it does not cause any loss of water pressure. This is particularly important for those who use well systems, as maintaining adequate water pressure can be a challenge.

I was also pleasantly surprised to discover that the filter effectively eliminates the chlorine smell in our water. Furthermore, the clear housing allows me to see the filter in action, and I can attest to its ability to filter out iron, rust, and sand.

Although my water is supplied by the city and meets EPA requirements, I consistently find dirt and rust captured by the filter every time I change it. The carbon in the filter does a good job of removing foul odors and improving the taste of the water. While it may not be perfect, especially considering its price-point, it certainly delivers on its promises.

In terms of longevity, I have found that I can go up to 40,000 gallons between filter changes without experiencing a significant drop in water pressure. This is impressive considering the carbon granules in the filter are not tightly packed between the paper-wound filters.

I recently purchased the PUREPLUS 5 Micron 10" x 4.5" Whole House FXHTC Sediment and Carbon Water Filter Replacement Cartridge, and I must say, it has exceeded my expectations. I have been using this filter for three months now, and it has done an excellent job in improving the quality of my well water.

Living on a farm, I have been dealing with high levels of tannins in my well water, which has resulted in a brownish color. I have tried various filters in the past, but none of them, regardless of their cost, have been as effective as this one. Since installing the Pureplus filter, my water is now crystal clear.

Previously, I was using a similar model filter from a big box store, but I was going through a filter every month. The cost was becoming a burden, so I decided to give the Pureplus filters a try. To my surprise, the water tastes remarkably better than it did with the name brand filter. Even though I still have to replace the filter monthly, it saves me loads of money, and the water just tastes better.

I specifically want to review the 4 pack of the Pureplus 5 Micron 10" x 4.5" Whole House FXHTC Sediment and Carbon Water Filter Replacement Cartridge with item number PP-10BB-CC. This filter is designed to reduce 99% of chlorine, remove odor, sediment, dirt, rust, sand, and particles.

Our water supply has always been a problem, with a green slime quickly building up. During the hot summer days, we had to change the filter every month. The Pureplus whole house filter has successfully solved this issue. Not only do we have clean tasting water, but we also have peace of mind knowing that we are protecting our health.

I purchased this sediment filter for the first stage of my whole-house filtration system, and I must say, it has exceeded my expectations. Typically, I use a 5 micron filter in the first stage, followed by a 1 micron filter in the second stage. After using this filter for about a month, I decided to open up the system and inspect the filter. To my satisfaction, the filter had effectively caught sediment before it reached the second filter. It works exactly as advertised and appears to be of equal quality to the ones I usually purchase for $30 each. I am impressed with its performance and would highly recommend it.

I recently bought this sediment filter for my point well water system, and I couldn't be happier with the results. The filter is highly efficient in removing minerals and sediment from my water, which is crucial before it enters the pH balancing media. Installing the filter was a breeze, as it fit perfectly into the housing just like the previous baffle filters I used. If you are looking to enhance the quality of your water, I wholeheartedly recommend this filter.

One of the aspects I appreciate about this filter is that it doesn't negatively impact the water pressure or quality. Even with fairly hard water from a well, I haven't noticed any adverse changes after installing this filter. It effectively maintains the water pressure and ensures the water quality remains consistent.

Furthermore, the convenience of ordering these filters is unbeatable. They are delivered right to your doorstep, allowing you to use them as needed and easily reorder when necessary. It's a hassle-free experience that saves both time and effort.