I Tested And Reviewed 10 Best Window Covering For Sliding Glass Door (2023)

I am extremely impressed with this product. The mirrored tint is thick and very easy to install. With a bit of water and patience, anyone should be able to install it. I highly recommend investing in a good quality Window Film Squeegee, preferably plastic. Make sure to wet the film thoroughly, as it helps to apply pressure when using the squeegee to remove any water pockets. The film is also easy to re-adjust and position where needed.

Once you have positioned the film where you want it, you can let it dry on the inside, giving you a perfect view with no water bubbles left behind. I love this product because it gives my house a very professional look and keeps it much cooler by blocking out about 68% of direct sunlight and UV rays. This definitely helps to reduce AC bills and provides privacy during the daytime.

However, it's important to note that the mirrored tint does not provide privacy during nighttime and does not work like traditional car or truck window tint. It does block visibility up to an hour before sundown, which is still quite effective. I personally run air-circulator fans during the day, and it feels like the AC has been on all day. The AC only comes on about 4-5 times a day during the summer season.

I also appreciate the privacy it provides during the day, as people can't tell if anyone is home or not. I have attached pictures to give you an idea of how it looks from the street or when people pass by my home. Overall, I highly recommend this product to everyone.

On a personal note, I was pleasantly surprised at how easy the installation process was. I will definitely be buying more for all of my windows. As you can see from the picture I attached, I had a really odd-shaped window where light was coming in and disturbing my day. The afternoon sun would shine directly into my eyes while I was sitting at my desk, and it would also make the room uncomfortably hot. Curtains weren't a practical solution for that top part of the window, so I decided to try this product.

It did take me a couple of hours to install it by myself, and it's not perfect, but it is going to make a significant difference in the heat levels in my office. Here are a few tips based on my experience:

1. Gather all your supplies before you start to save time.

2. Watch a few YouTube videos to learn installation techniques, including how to splice two pieces together for odd-shaped windows.

3. Avoid installing the tint when the sun is coming through the window, as it can get very hot.

4. Having a partner would be helpful but not necessary.

5. Use a sharp razor to avoid mistakes caused by a dull blade.

6. Use soapy water to position the film into place, and don't be afraid to use plenty of it.

7. You don't need a fancy squeegee; any will do the job.

If you are unsure about purchasing this product, I highly recommend giving it a try. I am so glad I did!

I recently purchased these window films and I couldn't be happier with my decision. As someone who had previously struggled with wood blinds being torn apart by my dogs, these films provided the perfect alternative for me.

When it came to installation, I followed some useful advice that worked well for me. The directions suggested cutting the film bigger than the window and then cutting it when on the window. However, I found that the film would move and this method didn't work for me. Instead, I cut the film to the exact size of the window, and if it was slightly longer, I simply tucked it between the glass and frame. I also used window film spray, a squeegee, and a yellow tool to make the process easier. The squeegee helped me eliminate air bubbles, and the yellow tool helped me neatly tuck away any excess film. It's important to ensure that the window is clean before applying the film, as even small debris like pet hair can be visible underneath.

I initially had some reservations about ordering the rainbow film due to the lack of pictures, but after reading another positive review, I decided to take the plunge. I'm so glad I did! The film is incredibly pretty, and the colors change depending on how the light hits it and the angle from which you view it. The installation process was relatively straightforward, with the only challenge being keeping the edges from peeling away before trimming them. I found that using an old gift card to run along the edges right before trimming with a craft knife worked perfectly. If you have trouble peeling off the backing, a small piece of tape or folding one of the corners can make it easier. If the film doesn't seem to stick well, using more water and thoroughly squeegeeing it should do the trick.

I purchased these window films in early December 2022 but only recently started the project due to the weather. I used various tools such as a squeegee, paper towels, pen, scissors, glass cleaner, spray bottle with clean water, cellophane tape, and a yardstick. Initially, I tried cutting the material with an xacto knife, but it didn't work well. However, after measuring, I traced a line on the film with a pen and cut it using scissors, which resulted in a much better and straighter line.

Separating the backing from the film proved to be a bit challenging. One suggestion I found was to attach cellophane tape to both sides of one corner, pulling on the tape in opposite directions to get the separation started. While this method didn't always work perfectly, I persisted until it did.

To prepare the windows, I cleaned them with glass cleaner and a squeegee. Then, I misted the glass with clean water and positioned the film against the window. This step would have been easier with an extra pair of hands, with one holding the top against the glass and the other holding the bottom away from the glass. However, I was able to lay the film flat and eliminate any bubbles without much difficulty.

I chose to position the film so that the bars ran horizontally. This way, each piece of film covered about half of the door, and I used two rolls for each door. The doors were 31.5" wide, and for the first door, I cut the film right at 31.5", resulting in some overlap on one side. I suspect the film stretched a bit when removing the backing. Trimming the excess didn't go smoothly, but I eventually managed to get it done. The second door was easier to complete as I used a 31" piece of film to provide some space on each side.

Only time will tell if the film holds up, as I live in Georgia where the summer sun can be harsh on plastics. However, if the film stays in place, I would definitely consider buying it again if needed.

I recently moved into a house with older etched glass doors and wanted to spruce them up without replacing them. After researching some DIY methods, I decided to try using window film. I must say, I am extremely happy with the results.

To begin, I used painters tape to hold the film in place and cut it to fit the doors perfectly. I then prepared a simple solution by mixing a cup of water with a squirt of hand soap in a spray bottle. I saturated the glass with the solution and started applying the film from the top, using a credit card to push out any bubbles. The process was straightforward and the end result looked fantastic.

I was initially nervous about attempting this project on my own, but after watching a few YouTube videos, I realized how easy it actually was. Not only did it give a fresh look to my doors, but it also provided privacy as no one can see through them anymore. What's more, the cost of the window film was much more affordable compared to purchasing it from a store like Lowes. Additionally, making my own spray with water and baby shampoo was a simple and cost-saving alternative. I highly recommend this DIY method.

In my kitchen, I installed window film to cover a window that I often have to duck under when moving from the shower to my bedroom. While the piece I bought could have fit the window in one piece if placed sideways, I preferred vertical lines, so I installed it in two pieces. Aligning the pieces required cutting the sheet to fit, which made installation a bit trickier. However, with some patience, I was able to complete the process in just 5-10 minutes, from cleaning the window to wiping down the finished product. The only slight imperfection is a tiny gap between the two pieces, which is barely noticeable. For now, it serves its purpose, but I plan to purchase a larger sheet in the future to install in one go and eliminate the gap completely.

If you have multiple windows of different sizes, it's worth noting that the rolls of window film may not start at the same point. This means you may need to order additional rolls to ensure the pattern matches on each window.

Lastly, I used window film to upgrade my front door, which has double-paned windows and one with water trapped inside. The window film not only adds a cute aesthetic, but it also prevents people from seeing the water trapped between the panes. The installation process was quick, taking only 5 minutes. If you're installing multiple pieces like I did, make sure to have them all facing the same side for a cohesive look.

I am absolutely amazed by this product! I initially used it on my French doors and was so impressed with the results that I decided to use it on the bottoms of the large windows in my sunroom as well. Although cutting and sticking the film on 30 rectangles was a bit tedious, the end result was definitely worth it.

One thing to note is that this film doesn't completely blur out the view from the outside. If someone were to use a flashlight, they would still be able to see inside the house at night. So, it's important to keep this in mind and perhaps use some thin shears or curtains for added privacy. However, during the day, the film provides a beautiful show that can be fully enjoyed.

I learned a few tricks when applying the film on the large windows. Firstly, it's crucial to measure twice and cut once. The first time around, it was difficult to get the sheets to fit perfectly, resulting in some trimming and repositioning. By taking the time to measure accurately, it saved me a lot of time during the second installation.

Using a good plastic tool to squeeze out air bubbles is also important, and I found that using a hairdryer in conjunction with the tool made the job much easier and quicker. The heat from the hairdryer helps the film stick better and allows for repositioning if necessary.

Here's my best method for applying the film: Measure the window, cut the film slightly smaller than the measurement, and wash the windows. Ensure that the film will fit without any overlapping edges before removing the backing. Once the backing is off, use the hairdryer to warm the film and then place it on the window, sliding it around until it's in the right position. Use the hairdryer and the plastic tool to remove air bubbles and ensure all edges are flat. Let the sun do its work, and enjoy the beautiful results!

I can't express enough how stunning this film is! It provides a level of privacy without blocking out light, allowing for a bright and airy atmosphere. The pictures I have included are unedited, but they still don't do justice to the beauty of this film. It truly transforms the look of any window or door and adds a touch of elegance to the space. I highly recommend it!

This window film is a fantastic product that delivers great results. To ensure success, there are a few key things to keep in mind. Firstly, it is important to thoroughly clean the glass with glass cleaner before applying the film. This will ensure that it adheres well and sticks properly to the window.

Secondly, when making the water/soap solution, it is recommended to use just a drop or two of dishwashing liquid in a spray bottle of water. The solution should not be overly foamy.

Next, it is important to completely wet the cleaned window with the water/soap solution. Don't be afraid to use a generous amount, as most of it will be squeezed out during application.

Before applying the film, it is advisable to pre-cut it with around 1" overhang on all sides. This will make the application process easier. Remember to remove the backing on the film before applying it to the window.

To ensure a neat finish, it is recommended to use a sharp razor blade or Exacto knife to cut the edges once you are satisfied with the placement of the film.

During the application process, a putty knife can be used to squeeze out the water/soap solution. It is advisable to place a towel on the floor below the window to catch any excess liquid.

Once the film is applied and the solution is squeezed out, it is important not to try to reposition the film. Any adjustments should be made during the step of pre-cutting the film.

The reviewer mentions that they have had this film on their windows for over 3 weeks, and it still looks great. They have not experienced any issues with corners or anything else, and overall, the film gives a professional appearance.

Another reviewer mentioned that they used this film to add privacy to their tub shower glass doors. They initially ordered two rolls, thinking they needed to cover the entire glass, but later realized that leaving some clear glass at the top and bottom would look better. They were able to easily cut one sheet in half to achieve the desired result. The reviewer removed the doors from the shower, applied the film, let it dry, and then trimmed the holes for the hardware before re-installing the handles. They are very pleased with the outcome and mention that it looks great.

A different reviewer purchased the same product from a different seller four years ago and had a positive experience. The film held up well throughout their tenancy, and when they moved out, it easily peeled off without leaving any marks. They have now ordered two rolls again for their new place, and the quality seems to be the same. The only difference is that this time, the film did not come with a plastic scraper for air bubbles. Fortunately, the reviewer had saved their old scraper. They specifically mention that this frosted film is excellent for providing privacy while still allowing plenty of natural light into the space. This is particularly important in San Francisco rental apartments, where sunlight is precious and windows often face neighboring windows at close proximity.

These sheers are the perfect solution for adding privacy or reducing sunlight in your space. The fabric has a lovely weight that allows it to gracefully fall to the floor, while still being light enough to gently sway in a breeze. Unlike many sheers on the market, these do not feel cheap or plasticky. They have a sturdy feel to them, and the cut and stitching are of high quality.

To ensure the best results, I recommend hanging the sheers first and then folding them together before steaming out any wrinkles. This allows the steam to fully penetrate the fabric, ensuring a smooth and wrinkle-free look. Each packet comes with two sheer panels, offering great value for your money.

These sheers have a linen look that adds a touch of elegance to any room, while still allowing ample light to filter through. They provide the perfect balance between privacy and natural light. In fact, when tested at dusk with a ceiling light on, it was impossible to see someone standing just inside the window from outside. This makes them an excellent choice for those looking for an inexpensive privacy solution.

Not only do these sheers provide privacy, but they also offer a beautiful view of the gardens from an enclosed porch. They are made from a faux linen material that is both durable and visually appealing. After washing them and gently steam ironing, they hung beautifully. In fact, they were preferred over any other sheers previously seen.

These energy efficient curtains are truly impressive. They are thick and effectively block out both cold drafts and light. I have two patio doors, and unfortunately, one of them cannot be covered with plastic sheeting. However, these curtains have been a great solution for keeping the cold out. Unlike other brands that claim to be energy efficient but are thin and only block out light, these curtains actually deliver on their promise.

During the winter months in Michigan, it is essential to keep the cold out and utility bills down. These curtains have been a game-changer for me in achieving both. I am so pleased with their performance that I will be ordering more for my other windows.

In terms of customer service, I reached out to the seller and received a replacement when I encountered an issue. I have also washed the new set without any problems. However, I must update my review to mention that after seven months, one of the panels became undone at two of the curtain rings. This is disappointing as they were my favorite curtains, and everything was perfect until this point. Out of the two panels, only one was affected.

Moving back to my original review, I ordered two sets of these curtains for my bedroom. I was delighted to wake up in a dark room after putting them up. The curtains are of good quality and effectively block out light. It's challenging to find white blackout curtains that work well, but these fit the bill perfectly. I have even shared photos of my room with the curtains closed at 9:30 am and minutes after opening them, with all blinds open. The curtains work exceptionally well without the need for additional measures.

The only minor concern I have is that the material is quite smooth. I worry about how easy it will be to clean if they get dirty. However, I will address this concern if and when I come across the situation. Overall, I highly recommend these curtains for their exceptional performance in blocking out light and cold drafts.

I recently purchased these window clings to provide privacy from salespeople and to prevent anyone from seeing inside my home. I must say, they exceeded my expectations. The textured design adds a beautiful touch to my windows, and now I can comfortably sit on my couch without feeling the need to dodge unwanted visitors. The installation process was relatively easy, although it is important to clean the glass with rubbing alcohol and use plenty of water during the application. Removing the thin lining can be a bit tricky, but it's manageable. I am so satisfied with the results that I plan on buying another roll for my bathroom and kitchen windows.

Initially, I was under the impression that these were adhesive-based vinyl, but I quickly realized they were window clings. Despite this, they still worked out perfectly for me. I lost the installation instructions, but cleaning the glass, soaking it with soapy water, and applying the cling with the shiny side down did the trick. Using a credit card to squeegee out the water ensured a bubble-free and secure application. Cutting the cling was not an issue for me either, as I used a simple razor knife with a fresh blade.

The main reason I purchased these clings was to address the privacy issue with our back door, which had open windows facing our living room and kitchen area. Living near woods and walking trails made me feel uneasy, as if someone was watching me at night. Most window films and tints I found were designed for daytime privacy and sunlight filtering, so I took a chance on these clings for nighttime privacy. I am pleased to say that they work exceptionally well in this regard. Contrary to the instructions, I found that applying them dry was much easier and more effective. There was no peeling or difficulty in straightening them out.

In terms of visibility, these clings exceeded my expectations. Up close, you can see some movement inside, but no details are discernible. However, from a distance of 10 feet or more, nothing can be seen at all. I was initially concerned about not purchasing enough, but I had plenty of film to cover my small window and even had leftovers to potentially use on my front door.

I am extremely satisfied with this privacy film. The application process was a breeze, especially with the help of my daughter and an exacto knife. The film is not sticky, but rather adheres to the surface with static, which I found to be quite effective. I decided to add a little privacy film to the middle of my shower, and I must say, it looks great. It is important to note that you should apply the film to the outside of the shower. Overall, it does an excellent job.

After having a new shower installed with beautiful, but completely clear glass doors, I wanted to add a touch of privacy. I was pleasantly surprised by the pretty addition it made to the overall bathroom aesthetic. The installation process was a breeze – just wet and smooth on with a squeegee. However, I do advise measuring correctly, as there is a distinct top and bottom to the pattern, and you don't want it to be sideways. In terms of sheerness, I give it 5 stars. It is not too sheer, but just perfect for my needs.

I also used this privacy film on my sliding glass doors to prevent my dog from barking at squirrels in our yard. It went on smoothly and easily. Despite being exposed to full California sun, there has been no warping after weeks of use. The film didn't self cling well across the top, so I used glue gun dots to secure it. You can't even tell, and so far, it is working great. I am now considering getting more for my bedroom glass doors. I highly recommend measuring your space carefully. One roll was enough to cover two doors halfway up. People even mistook it for frosted glass and asked me how much it cost to get it done.

I also purchased this privacy film for my daughter's apartment windows, both in her bathroom and a small window in the living room. It was incredibly easy to apply and effectively stops the transfer of hot and cold from the window glass, thus saving on energy costs. It allows light to come through while providing the desired privacy.

I recently purchased this product and I must say, I am very impressed. Initially, I was hesitant to buy it because it was described as "semi private" and not recommended for use in bathrooms. However, I needed something to add privacy to my clear shower doors and decided to give it a try. I was pleasantly surprised to find that it provided much more privacy than I expected. It is extremely difficult to see through, even with great effort.

Not only did it enhance the privacy in my bathroom, but it also improved the appearance of my shower doors. It gave them a more stylish and sophisticated look. I also used it on my front door sidelights, and it greatly enhanced the overall aesthetic of my entryway.

During the installation process, I encountered some issues with bubbles forming under the film. However, I found a simple solution by reapplying the film with some Windex underneath and using a credit card to squeegee out the bubbles. It does require a bit of practice to install it perfectly, but it is not difficult to learn.

The product is incredibly easy to use. When I moved into my old house, I quickly realized the importance of cleaning any dirt at the bottom of the glass before applying the film. I used a handheld razor blade to cut the film to the size of the window and then trimmed the excess once applied. The end result looks fantastic, and I highly recommend it.

In addition to my bathroom, I also used this product on the windows on either side of my front door. Previously, people would often peer into my house through those windows, which made me uncomfortable. This film provided the perfect solution. It was easy to install, and it only took me about 20 minutes to cover both windows. I purchased an install kit along with the film, which made the process even easier, although it is not necessary. Now, my front windows look great, and I no longer have to worry about people invading my privacy.

Lastly, I used this film to temporarily cover a bathroom window while waiting for curtains to arrive. I was looking for something that was both decent-looking and inexpensive, and this product fit the bill perfectly. It was easy to apply, but there are a few pointers that may be helpful. Firstly, you'll need a very sharp knife and a straightedge to trim the film cleanly. Practice is key, as the angle of the knife is crucial. Secondly, make sure to clean the window thoroughly before spraying it with water. If you don't have a spray bottle, a wet paper towel will do the trick. Lastly, peeling off the smooth clear backing film can be a bit challenging. I found that using tape at a corner of the cut piece of window film helped to peel it off more easily.