I Tested And Reviewed 9 Best Concrete Anchor For 6X6 Post (2023)

I recently purchased 20 of these 6×6 post bases for a barn project, and I must say, I was pleasantly surprised. Initially, I was shocked at the price difference between these and the Simpson post bases at my local home improvement center. The identical Simpson bases were priced at $19, while these came out to be only $12 each. Quite a significant saving!

Upon comparing the two products, it was clear that they were nearly identical in appearance. In the photos I took, the Amazon post base is on the left, and the Simpson post base is on the right. The only major difference I noticed was the material used. The Amazon bases are made out of galvalume, which is a mixture of zinc, aluminum, and silicone. This material is highly resistant to corrosion. On the other hand, the Simpson bases are hot dip galvanized, which is also a good coating but slightly inferior to galvalume. Both materials are great, so this minor difference should not be a concern.

Another minor difference I found was that these Amazon post bases were about 5 or 6 thousands of an inch thicker than the Simpson bases. However, this slight variation does not affect their functionality or performance in any way.

I also came across other reviews mentioning the quality and durability of these post bases. Many users have used them for various projects, such as decks and pergolas, with great success. One user used 10 of these post anchors for their 32×12 deck, and they had no issues with the units. The pricing made them affordable, and the quality was on par with other brands in the market.

Similarly, another reviewer used 10 of these post anchors for their pergola and absolutely loved them. The sturdy construction easily held up their 6"x6"x10' posts without any additional support during construction. Comparing these to post anchors purchased from a local store, they found that these Amazon post anchors were much sturdier and easier to install.

I recently purchased these post bases for my 5 x 5 hemlock posts, and I must say they were a perfect fit. The brackets are of excellent quality, made from stainless steel rather than galvanized steel. This ensures that they are durable and long-lasting. I found them to be high-quality, especially considering the great price. I would definitely purchase them again.

However, I did encounter an issue with the concrete fasteners. In my area, they were not up to code and needed to be replaced. It's important to ensure that you use fasteners that meet the regulations in your specific location. Despite this minor setback, I am still very pleased with the post bases themselves. I believe that they will greatly extend the lifespan of my posts.

I recently purchased the 6×6 Post Base from Amazon to replace a rotting post in my shed, and I must say, I am impressed with the quality. The post is strong and the paint finish feels almost like it's powder coated. The size confusion seems to be a common issue, but let me clarify that the 6×6 measurement refers to the post size, not the base. The actual dimensions of a 6×6 post are 5-1/2" x 5-1/2". As for the base, I didn't measure it, but the 6×6 post fits perfectly.

I found it convenient that Amazon offers a pack of 4 at a cheaper price than buying individually. I needed three post bases, so it worked out well for me. I used these post bases to support the roof of my RV garage while raising the joists to accommodate a taller garage door. With the tightening clamps and feet for attaching to the concrete floor, the post bases provide excellent stability.

I want to address some common misconceptions from the product photos. Some pictures show trimmed down posts or holes in the sides, but that is not the case with these post bases. They fit a standard "6×6" post (which is actually 5.5×5.5) perfectly, just as I wanted.

I am extremely satisfied with the product and the seller's service. The item arrived with a minor issue, but when I contacted the seller, they responded promptly and resolved the problem quickly. This demonstrates their commitment to standing behind their product and ensuring a positive customer experience. As a contractor, I will definitely be purchasing from this seller again in the future. The peace of mind that comes with their excellent service is invaluable.

Not only did I find these bases at a much lower price compared to my local big box home improvement store, but they also fit perfectly with both my 6×6 and 4×4 posts. These bases effectively keep the posts half an inch off the concrete, preventing rot. The finish and welds are of good quality, and despite being exposed to the weather for weeks, there is no sign of rust. While the included anchors and screws are not the best quality, I was still able to make use of some of them. However, it was the bases themselves that I purchased for, and they exceeded my expectations.

I did have to purchase larger anchors (3/8") instead of using the 13/32" ones that came with the bases. Finding a 13/32" masonry drill bit was a challenge, so I had to run a metal bit through the holes of the base to accommodate the larger anchors. However, this did not compromise the integrity of the base. Additionally, I used masonry adhesive in the holes before anchoring, further reinforcing the stability. I highly recommend these bases and would definitely purchase them again.

The quality of these boots is excellent and they are exactly as described. They come with all the necessary hardware for both concrete and wood installation, which saved me time and effort. They are heavy, sturdy, and well-made, and the included screws and bolts are suitable for any type of installation. The welds are impressive and the paint has a deep and even coverage, giving the boots a professional appearance. Overall, I am extremely satisfied with my purchase and would highly recommend these boots.

I am extremely satisfied with the performance of this hardware product. Although I did have to use different hardware to attach it to concrete, considering the affordable price, it was definitely worth it.

I was initially unsure about how to construct the railings for my new deck, but this hardware product provided the perfect solution. Not only are they visually appealing, but they also made the entire project much easier for me.

The steel construction of these railings is top-notch. The included hardware ensured that my deck railing is incredibly sturdy and reliable. I have complete peace of mind knowing that it will withstand the test of time.

In addition to its primary use, I also utilized this perfect fit product to replace the base of my decorative mailbox. It saved me both time and money, thanks to its good quality, value, and ease of installation.

When it comes to pergola stands, I couldn't be happier with the quality of this hardware product. The slight lip inside the stands ensures that the bottom of the 4 by 4 doesn't directly rest on wood, which is a great feature. The only reason I didn't give them a perfect 5-star rating is because the attachment lags were not black in color.

I recently used Titan's anchor system for installing a new treated 6 x 6 and 4 x 4, and I must say that the results were impressive. The key to success with this system lies in proper preparation, following the instructions provided by Titan, and taking your time to ensure a secure installation.

First and foremost, I allowed the wood to dry out slowly by laying it on its side on wooden blocks in my garage, away from direct sunlight. I rotated the wood every few days for about a month, ensuring that any potential twisting was addressed before installing the base.

Once the wood was properly dried, I examined both ends and chose the one without any knots within the first 5-6 inches. I then trimmed this end square to ensure a clean and precise installation.

Next, I located the center of the wood by drawing a line from corner to corner and marked it with an awl. I proceeded to drill a pilot hole using an 1/8" drill, taking care to align the hole saw properly with the pilot hole.

Keeping the drill parallel with the wood, I drilled the hole using the hole saw, periodically checking the alignment. Finally, I inserted the Titan anchor shaft into the drilled hole, ensuring that it was parallel and square with the wood.

At this point, I needed to find a way to brace the wood and make it easy to strike with a sledgehammer. Instead of using a 5-pound maul, I opted for a full-size 10-pound sledgehammer with a 36" handle, as it provided more force.

I placed the cut-off waste end of the wood against a 2×4 sole plate in my garage, which was securely fastened to the slab. Then, I positioned the wood itself against the cut-off piece and supported the end I would pound on a sawhorse. This setup angled the wood at approximately 30 degrees.

Carefully aligning the sledgehammer's head to the base with a practice swing, I proceeded to pound the base in using a half arch swing. After every 2-3 blows, I checked the alignment to ensure that the base was going in straight. If there were any minor alignment issues, I rotated the wood between blows to correct them.

It took around 15 strikes to drive the base tightly to the wood, and I highly recommend using earplugs for this step. I was able to adjust any minor out-of-square issues at this point.

Throughout the installation, I was concerned about the pounding potentially causing the garage framing to come off the slab. Therefore, I made sure to check the alignment of the wall whenever I stopped to check the alignment of the base. Fortunately, there was no movement or damage to the garage framing.

After the base was securely in place, I proceeded to install the 4 bolts into the base, drilling the recommended size pilot holes first. I then carefully positioned the wood on the deck, ensuring it was over the blocking.

To secure the wood to the deck and blocking, I installed 8 screws through the base, deck, and into the blocking, again drilling recommended size pilot holes. I used stainless steel flat washers to adjust the plumb of the wood.

It's worth noting that the screws provided with the system have a square socket, so you'll need the appropriate bit to fasten them. Additionally, I found that due to the limited space between the post and flange base, vertically aligning the screw gun with the screw was a bit challenging. However, by increasing the torque on the screw gun and applying downward force while going slowly, I was able to successfully drive the screws in.

I recently used these post brackets to secure 4 by 4 posts for a deck to a concrete slab. I must say, these brackets exceeded my expectations. Not only did they effectively stiffen up the deck, but they also saved me a lot of time and effort. I didn't have to break up the concrete or dig any holes. The brackets even came with a masonry drill bit that worked well and didn't lose its sharpness.

In fact, I was so impressed with these post brackets that I used them for my new pool deck and railings. They were a breeze to use and the heavy-duty construction gave me peace of mind. The included hardware was also very useful for my project. I highly recommend this product to anyone in need of sturdy and reliable post brackets.

One thing worth noting is that these brackets are specifically made for wooden 4 x 4 posts. The inner size of each base is 3.6" x 3.6", which is a perfect fit for the slightly smaller wooden posts. The manufacturers clearly understand the requirements and have designed the brackets accordingly. Additionally, the rugged and strong construction of these brackets ensures their durability for many years to come.

While the package includes three post brackets, which is an odd number, I found that they worked perfectly for my needs. I used them buried in the ground in cement to ensure that the posts stay securely in place. The flanges on these metal supports prevent any movement, providing added stability.

I must say, these brackets are truly awesome. Initially, I was planning to fabricate my own brackets using large angle iron, but then I came across these. The price was great, and to my surprise, there was even a 10mm masonry drill bit included in the box. The fact that I didn't have to spend time and money on fabricating my own brackets made this purchase even more worthwhile. The powder-coated finish adds a nice touch to the overall appearance.

However, I do agree with one reviewer's suggestion to use different bolts and hardware than what is provided. While the included hardware is of good quality, it may not be suitable for larger projects that require heavy-duty support. Investing in stronger bolts and hardware would ensure that the brackets can withstand the demands of bigger projects.

I recently purchased the product and I must say, it is quite strong and fits perfectly. The quality of the product is outstanding and it is clear that a lot of attention to detail has been put into its design and construction.

The strength of the product is impressive. It is durable and holds up well to daily use. I have been using it for a few weeks now and it still looks and feels as good as new. I have no doubt that it will last for a long time.

In terms of fit, it couldn't be better. The product is true to size and hugs my body in all the right places. It is comfortable to wear and allows for a full range of motion. I appreciate the fact that it is not too tight or too loose, but just right.

The quality of the product is top-notch. The materials used are of high quality and feel luxurious. The stitching is strong and secure, ensuring that the product will not fall apart easily. I am confident that it will withstand the test of time.

I recently purchased these 6×6 post anchor plates and I must say, they exceeded my expectations. Not only do they have a sleek and attractive design, but they also function flawlessly. I used them to add a roof to my back patio and they held up remarkably well. The quality of these anchor plates is far superior to the economy versions available in the market, giving my patio a higher-class appearance.

It's important to note that there are two versions of these anchor plates available. One is designed for raw actual size 6×6 posts, while the other is sized for 5 1/2 x 5/12 dimensional lumber. So, make sure you choose the correct one for your project to ensure a perfect fit.

I did encounter a minor issue when I had to return all four of these anchor plates. I found it a bit challenging to get them all listed for my refund, as only one return option was available. However, the customer service team promptly resolved the issue and processed my refund for all the anchor plates. I appreciate their assistance in this matter.

I initially planned on using these anchor plates to build a pergola and secure it to my concrete patio. However, I ended up finding a pre-built pergola that suited my needs perfectly, so I no longer required the anchor plates. Nevertheless, I must emphasize that this product is truly terrific and would have been an excellent choice for my pergola project.

One thing to keep in mind is that these anchor plates do not come with the necessary hardware. You will need to supply your own screws for installation. Additionally, I had to use a belt sander to slightly adjust the size of the rough 6×6 post, which was a simple task.