I Tested And Reviewed 10 Best Bathroom Exhaust Fan With Led Light (2023)

The Akicon product is easy to install, visually appealing, and functions efficiently. The customer service provided by Akicon is exceptional. When we accidentally broke the glass dome while unboxing the product, we contacted customer service to order a replacement. They promptly responded to our email, requested the order number, and shipped us a replacement glass at no cost. The replacement arrived within a quick timeframe of 3 days. We were pleasantly surprised by their generosity and exemplary service.

Regarding the installation process, the instructions recommend aligning the box unit flush with the bottom of the ceiling drywall. Although I slightly overextended it by a quarter or half an inch, it did not affect the end result. However, exceeding half an inch would require readjustment and placing the screws higher. The fan operates quietly, which is a desirable feature. The light, though somewhat dim, may not suit those who prefer brighter illumination.

The electrical components are well labeled for the fan and light. It is worth noting that there are two ground wires and two neutral wires, which may seem redundant. It would be more convenient if they provided a single #12 ground wire and a single neutral wire. The product recommends using easy connect connectors, but in the absence of those, wire nuts were used instead. It was a tight fit, but with careful handling, all the nuts and #12 wire were accommodated within the wiring housing of the unit. However, if you prefer larger wire nuts or #10 wire, it may be advisable to install a junction box adjacent to the unit.

In my case, I purchased three units to replace the old, noisy units that were initially installed in my house. The Akicon units proved to be easy to install and wire. Since I was replacing existing units above the drywall ceilings, some ceiling cutting was necessary to create space for proper installation onto the floor joist. However, the new units operate quietly and seem to be functioning well thus far.

I recently purchased the exhaust fan and light combo, 50 CFM, 2.5 Soness and I must say, I am extremely satisfied with my decision. Not only was the cost reasonable, but the performance of the fan exceeded my expectations.

Upon receiving the fan, I made a few adjustments and installed it in my 1 1/2-bathroom. The installation process was straightforward and hassle-free. The included 4.5-watt LED light added a touch of elegance to the overall appearance of the fan.

One of the standout features of this fan is its quiet operation. It is noticeably quieter than the previous fan I had in my bathroom. In fact, I was so impressed with its performance that I have decided to purchase another one for my second bathroom.

To address some minor issues, I would recommend applying caulk to the connectors and outlets where fans are connected to ducts with flappers. This will eliminate any rattling sounds caused by vibrating parts. Additionally, using screws instead of nails to fasten the fan to the joists will prevent any potential retraction of the claws due to fan vibrations.

To further reduce vibrations, placing insulation between the beam and the fan mounting plate is advised. I found that using 1/4-inch rubber worked effectively in this regard. Another useful tip is to spray foam insulation around the area where the fan housing meets the ceiling. This not only adds stability to the fan but also prevents AC leakage.

During the installation of the fan and light housing, it is important to ensure that the brackets holding the light housing are tight. This can be tested by applying pressure with your hand and checking for any movement. Additionally, securing the wires to the fan housing will prevent any potential vibration or noise caused by loose cables.

In terms of performance, these fans are significantly quieter than the previous ones I had. I measured a noise reduction from 75 decibels to below 50 decibels when using this model. Furthermore, the suction power of the fans is commendable as it effectively reduces humidity in the bathroom, preventing any trigger of the air filter's dust detection.

Considering the affordability of this exhaust fan and its ease of installation and maintenance, I can confidently say that it is a fantastic product. It not only enhances the functionality of my bathrooms but also provides a more pleasant and quiet experience.

I recently replaced my old bathroom exhaust fan with a new one and I am extremely satisfied with the results. The packaging of the product was excellent and the manual provided was helpful in guiding me through the installation process for both new construction and remodel.

During the installation, I noticed that there were 1 ground, 2 hot, and 2 neutral wires to connect. Although I found it a bit odd, I simply combined all the neutral wires while wiring. One convenient feature of the fan is that the plastic piece that attaches to the exhaust duct is removable, allowing me to attach the duct and then push it back into the attic until later.

Looking back, I would recommend installing the bracket before placing the exhaust fan in the attic, as it was a bit challenging to screw in the far side with the fan already in place. Additionally, I encountered a small issue with the bracket, which left about a 1/2 inch gap on the side not against the ceiling joist. To ensure that the fan pulls air from the bathroom rather than the attic, I used foil duct tape to cover the gap.

Once installed, I was impressed with the light output of the fan, which provided a nice aesthetic. The sound produced by the fan was significantly lower compared to my old one, making it a great improvement. I even recorded a quick video to demonstrate the difference in sound.

The Super Easy to Install and Quiet Exhaust Fan

If you're looking for an exhaust fan that is easy to install, operates quietly, and looks great, then look no further. This exhaust fan is perfect for both DIY enthusiasts and professionals alike. Not only is it highly affordable, but it also offers a range of convenient features.

One of the standout features of this exhaust fan is its ease of cleaning. The light and vent cover can be easily unclipped, allowing for quick and hassle-free cleaning. The electrical connection for the LED light is also designed with simplicity in mind. With a simple turn and lock mechanism, you can easily remove the cover, clean it, and then re-install it without any fuss.

While the fan worked perfectly out of the box, some users may encounter an issue with the light not functioning. Thankfully, there is a simple fix for this. By reversing the wires before they go into the LED module, you can quickly resolve any issues with the light. A quick fitting allows for easy wire removal and reconnection.

One common concern when it comes to exhaust fans is the noise level. However, this fan pleasantly surprised many users with its quiet operation. It is not as loud as initially expected, making it a perfect fit for any bathroom. Additionally, it is important to note that the light emitted by this fan is on the LED side, rather than a soft white. This may be a personal preference for some users.

Despite the overhead work required for installation, many users found it to be well worth the effort. The fan runs quietly and efficiently on a daily basis, without any annoying humming sounds. The quality of the light emitted is also exceptional, eliminating the need for additional lighting in the bathroom when the fan is running.

I recently purchased and installed this fan in my bathroom, and so far I am quite impressed. Even without being properly secured, the fan is extremely quiet, which is a major plus. I initially had concerns about the 50 CFM rating, but I had previously used a fan with the same capacity and it worked fine. The light, although not my preferred warmer tone, is still nice and bright, without being too harsh or blue. There is a slight delay when switching it on, but this is common with older LEDs and is not a significant issue. The only minor confusion arises from the fan being so quiet that it takes a second to spin up, making it seem like nothing is happening immediately after turning on the switch.

Installation was a bit more complicated for me due to various reasons, such as the fan location not being near a beam and the old adjustable metal brackets not being suitable for this fan. Additionally, the exhaust duct had a twisted path, requiring me to make a few trips to the attic to ensure proper installation. However, these challenges were not insurmountable and were more specific to my situation.

One thing I found helpful was removing the simple flap inside the exhaust connector before fitting it into the duct. This allowed me to have better access and control, with one hand on the inside. It is worth noting that the flap is made of light plastic, so care must be taken when removing it, as there are small pins that hold it in place. The main disc easily bends to release these pins from their slots. It is advisable to take a photo before removing the flap and ensure that the exhaust is oriented correctly, so it swings shut when not in use. In my case, the previous fan had this orientation upside-down for decades.

Regarding the design, I noticed that the outer grill is slightly longer in one direction than indicated in the product photos. It measures around 9.5" instead of the stated 8.67". This worked out well for me, as it was still smaller than my old grill.

I recently purchased this bathroom fan to replace my old one, which was loud and outdated. The demolition of the old fan proved to be a bit challenging as it was located in a far back corner of my attic and was securely nailed in place. After some effort and about an hour of work, I was able to remove the old fan.

Installing the new fan was relatively simple, although there were a couple of considerations. The hole for the new fan was larger, so I had to make some drywall cuts to ensure a proper fit. Additionally, the new fan did not have a sealed compartment for the electric, so I had to purchase a separate box to mount and secure the wires. The exhaust termination on the new fan was also in a different size, so I had to replace or reduce my existing venting to accommodate it.

Another customer mentioned that they replaced their noisy fan with this one during drywall repairs. They were pleased with the fan's quiet operation and how it prevented their hot showers from fogging up the bathroom mirrors.

Someone else commented that this fan works well and was easy to install. They appreciated the quietness of the fan and the brightness of the light it provided. They felt that it met all their expectations.

A different reviewer mentioned that this fan is much quieter than their previous one, although they did have some difficulties with the installation directions. They found them to be unclear and had to go through several trials and errors to get everything right. However, once they figured it out, they were happy with the fan's performance.

In my own experience, I found this fan to be easy to install, relatively quiet, and aesthetically pleasing. I am satisfied with my purchase thus far.

I recently purchased the light, fan, speaker combo that I was initially skeptical about due to negative reviews. However, I must say that my experience with this product has been nothing short of impressive.

Firstly, the installation process was relatively easy and took my husband, who is not an expert in electrical work, only 45 minutes to complete. The speaker on this combo is outstanding, producing loud and clear sound. On the other hand, the fan operates very quietly, ensuring a peaceful and comfortable environment.

The light itself is truly remarkable, and I wish I had one in every room of my house. The only minor inconvenience is that it requires a separate electrical box and runs on 2 AAA batteries. However, considering the amazing features of this light system, this is a negligible issue.

I cannot express enough how much I love this light, and so far, it has exceeded my expectations. I will be sure to update my review if anything changes in the future.

In addition, I replaced a basic light with this fan in our vacation home, which is located in a dry climate. Initially, I didn't think we needed a fan, so I only installed a 15a circuit for a light. However, when I realized the need for a fan, I was dreading the idea of installing additional electrical wiring in the attic.

To my surprise, I discovered the Broan light, which not only has a remote control but also features color-changing LED lights and a speaker. Although I didn't really care about the speaker, I chose this model because it was more affordable than the one without it. The $199 price tag was worth it to avoid the hassle of running additional electrical wiring.

The fan itself is incredibly powerful and effectively keeps the bathroom steam-free, even after a hot shower. Moreover, the LED light is exceptionally bright, and it can be dimmed if it becomes too intense.

I would like to address some of the negative points I have come across regarding this light. I believe that these negative reviews are from individuals who haven't taken the time to understand how the light functions.

The top button on the remote always turns the light on to white, and it is a simple push-on or push-off operation, making it easy to use in the dark. The small rocker buttons below the top button can be used to dim or brighten the light.

The middle button activates the color mode by briefly pressing and holding it. It turns on the last color used, and you can change the color by pressing the same button to the left or right. Pressing and holding the button for a couple of seconds activates the color-changing mode. To return to white light, simply press the top button. The dimmer buttons also work to dim the lights in color mode.

The bottom button on the remote controls the fan, which has a single speed like most fans. It is worth mentioning that the remote does not have a timer function, but the accompanying app does offer this feature, allowing you to set a timer between 5 to 60 minutes. The rest of the app's functions are relatively basic, such as turning the light or fan on/off, dimming lights, changing colors, and creating color-changing scenes. However, the app does not have an option for updating the firmware, so additional features may not be available in the future.

While we may not use the app extensively, it is worth noting that once you establish a Bluetooth connection, it remains connected even when the app is closed. This means that you may hear typing clicks in the background. It would be convenient if the app automatically disconnected the Bluetooth connection when closed. The app also does not have control over the speaker, which functions like a basic Bluetooth speaker. Nevertheless, the sound quality is decent for its purpose. The Bluetooth connection does not automatically connect, which is a positive aspect, as it could be annoying if it did.

Regarding the installation process, the instructions provided are not very clear. However, it installs similarly to any other fan, and there are helpful tutorials available on YouTube. I personally used a $20 wall vent kit and vented it into our garage, which has a high ceiling. This saved me from having to create an additional hole in the roof. I have been using this method to vent our on-demand hot water heater for years without any issues.

I highly recommend choosing this fan even for new construction projects, as the color LED option is a fantastic addition and complements other lights with Kasa color-changing bulbs. Despite the higher price compared to traditional exhaust fan/lights, I confidently give this product a 5-star rating.

I recently had two units of this bathroom exhaust fan installed in my older home that had never previously had bathroom exhaust fans. The installation was fairly straightforward, with only a short run of ductwork to the soffit for exhaust. However, I was not impressed with the level of suction from the fan. When I performed a basic test by placing a square of toilet paper on the grill, it barely held it via suction. I expected a 110cfm fan to have a stronger pull. I couldn't understand why the suction was reduced with such a short duct run. Removing and replacing the fan with a different model or brand seemed like too much of a hassle, so I decided to reach out to the manufacturer for assistance.

After speaking with their tech support, they suggested that the reduced suction could be due to something inhibiting airflow. Upon inspection, I discovered that the bug grill in the soffit vent was causing the issue. The vent I used had a very fine plastic mesh insert to prevent bugs from entering the duct. Once I removed the grill, the airflow improved significantly, and the fan started working as I had hoped. While I may consider replacing the vent grill with a larger mesh, I don't see it as a necessity.

We recently upgraded our exhaust fan from an old model with 60cfm and 4 sonas, and we are extremely satisfied with the results. The installation process was a bit more complex than we anticipated, as it required going into the attic to hook up the exhaust pipe. However, we managed to complete the installation within an hour, including the purchase of a 4" to 3" extension to fit our existing pipe.

Although the listing stated that attic access would not be necessary, we didn't mind going up there to ensure a proper installation. We wired everything to the existing wires, so now the light turns on whenever the fan is activated. The light itself is quite bright, providing ample illumination in the bathroom. As for the fan, it is impressively quiet compared to our old one, which is a major improvement.

In terms of performance and aesthetics, we give this fan a perfect score of 5 out of 5. While the installation process wasn't exactly as advertised, it didn't pose a significant inconvenience for us. Overall, we highly recommend this product for its excellent performance, quiet operation, and attractive design.

In our quest to replace our noisy builder-grade fans after almost two decades of annoyance, we opted to try this fan based on positive reviews, even though it was not a name brand and had a slightly higher noise rating. We are happy to report that it was a smart choice. The majority of the replacement work involved removing the old fan, including dealing with the dropped insulation. Fortunately, this fan fit perfectly into the existing opening, eliminating the need for any cutting or enlargement.

We did purchase a plastic 4" to 3" adapter separately, knowing that our old fan used a 3" exhaust duct. The installation process claimed to not require attic access, but we found that the flanges designed to attach the fan to the joist could only be used from above. However, the fan housing had a groove at the bottom, making it easy to drill a couple of holes and attach the fan from below. If the holes had been pre-drilled, we would have given the installation process a 5-star rating.

One major advantage of this fan is its exceptional quietness. With the bathroom door closed, it is virtually silent. Considering the price, this fan offers unbeatable value for money. We are truly impressed with its performance and quiet operation.

The replacement fan I purchased for my bathroom ceiling was the perfect size and exceeded my expectations. Unlike my previous fan, this one had a built-in LED light, which was a fantastic addition. Having an extra light source in the bathroom has been a delightful upgrade. Furthermore, I was pleasantly surprised by how quiet the fan operates compared to the old one that was installed back in 1982. The LED light is also bright and provides ample illumination in the bathroom.

Installing this replacement fan was a breeze and only took me around 30 minutes. The included installation instructions were clear and easy to follow. Additionally, all the necessary hardware was conveniently packaged in the box. I would highly recommend this product to anyone looking for a reliable and efficient bathroom fan with a built-in LED light.

However, it's worth noting that this particular fan may not be suitable for everyone. If you do not have attic access, I would not recommend attempting to install it from below. The fan and motor do not come out of the housing like some other models, making it challenging to install without attic access. Therefore, it's crucial to assess your installation capabilities before purchasing this product.

One minor drawback of this replacement fan is that it can be difficult to install, especially if you are replacing an existing fan. It is designed more for new construction due to its mounting tabs. Keep this in mind if you are considering replacing an old fan with this model.